From: Aditya Kashyap Subject: Re: single-file file system? (fwd) Date: Fri, 1 Oct 2004 16:16:42 -0400 (EDT) Sender: linux-fsdevel-owner@vger.kernel.org Message-ID: References: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: linux-fsdevel Return-path: Received: from sbcs.cs.sunysb.edu ([130.245.1.15]:39050 "EHLO sbcs.cs.sunysb.edu") by vger.kernel.org with ESMTP id S266467AbUJAUUV (ORCPT ); Fri, 1 Oct 2004 16:20:21 -0400 To: Bryan Henderson In-Reply-To: List-Id: linux-fsdevel.vger.kernel.org > >The raw partition does not do any readahead or write behind. > > There's some terminology confusion here. These are not raw devices in > Linux terminology. They are block devices. I can tell by the device > special file name (/dev/hdXX) and by the fact that they're about as fast > as filesystem access. > > The block device does have readahead and writebehind. The raw device > (because it has no readahead or writebehind) would be much, much slower > with these 4K reads and writes. That is correct. What I put down as raw devices are block devices on a system running the 2.4.24 Linux kernel. Why then the 10% discrepancy in time, when both interfaces have readahead and writebehind while transferring data? Thanks, Aditya