From: Paul Lewis Subject: Re: KPTC RPM required for MANDRIVA 2005LE Date: Mon, 6 Mar 2006 23:11:21 +0000 Message-ID: References: <440B57E0.3020702@ccr.jussieu.fr> Mime-Version: 1.0 Return-path: In-Reply-To: <440B57E0.3020702@ccr.jussieu.fr> Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" Content-Transfer-Encoding: 7bit To: Bernard Pidoux Cc: linux-hams@vger.kernel.org Ok Bernard Many thanks for the advice. Will revisit this again and see how I get on. Thanks for the pointers. Paul In message <440B57E0.3020702@ccr.jussieu.fr>, Bernard Pidoux writes >Paul Lewis wrote : >> Hello All >> Can anyone point me to were I can get hold of KPTC program in RPM >>format for running under MANDRIVA(Mandrake) 2005LE on a laptop. (My >>first experience of RPM Distributions and X) (As I have run Slackware >>non windows system for 10+ years) >> Have not been able to compile it. So giving up as many search engine >>hits (for missing KDE headers) reported by others trying to compile >>other source code on this distribution. > >KDE headers are part of libkdecore4-devel that you should obtain using >the following command from a root Konsol terminal : > >urpmi libkdecore4-devel > >To be sure I just dowloaded kptc-0.2 from http://kptc.sourceforge.net/ >and after installing the development library above I was able to >compile and run it on a Mandriva 2006 official (cooker). > >> I do have the development code installed during the installation of >>this distribution. Following some advice I read, doing urmpi >>kdebase-devel and for kdelibs-devel seem to error with missing files >>off ISO disk images. >> Or my other choice is to wait until a later version 2006 (i586 32 >>bit) becomes available. >> Paul g4apl >> > -- paul@skywaves.demon.co.uk