From: khali@linux-fr.org (Jean Delvare) Date: Tue, 27 Sep 2005 09:46:03 +0000 Subject: [lm-sensors] [PATCH] fix SW PEC for write byte data Message-Id: List-Id: References: <200509240819.AA01317@k7.kit.hi-ho.ne.jp> In-Reply-To: <200509240819.AA01317@k7.kit.hi-ho.ne.jp> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi Mark, all, On 2005-09-26, Mark Studebaker wrote: > PEC really used for block transfers (including ARP and the IPMI-over-I2C), > not familiar with any chip using it for single bytes. Maybe the overhead in the case of short transactions frightened designers. Nevertheless, I have an ADM1032 evaluation board, and the ADM1032 is supposed to support PEC. I tried i2cdump in "bp" mode and it failed, but I guess this isn't surprising with Hideki reporting read_byte and read_byte_data w/PEC being broken. At least this should help me test any fix (or rewrite) I may do on software PEC support. -- Jean Delvare