From: Giuliano Pochini Subject: RE: Echoaudio driver hangs on Darla24 Date: Wed, 14 May 2003 10:38:09 +0200 (CEST) Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <200305132126.54463.highenergyparticle@attbi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <200305132126.54463.highenergyparticle@attbi.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: HighEnergyParticle Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On 14-May-2003 HighEnergyParticle wrote: > I downloaded ALSA 0.9.3 and echo generic driver and 0.5.10. Built with gcc > 3.2.2 on 2.4.20-gentoo kernel. > > modprobe snd-echoaudio don't give out any error. > > But after start the Emixer, the X-Window went blank. I can kill the X-Window > with Ctrl-Alt-BS. This is when the Echo Darla24 in a PCI slot that share IRQ > with Radeon AGP card. > > Moved Darla24 to a slot that has it's own IRQ, now start the Emixer would > completely freeze up the whole system. I had to use the hardware reset button. > > I tried with both APIC mode and convention IRQ, disabled ACPI, and PnP OS. > Still the same thing. The card generates interrupts only during pcm or midi i/o. If the mixer makes it crash, the problem must be elsewhere. Try to use amixer instead of Emixer. Can you send me related system logs and the output of "amixer controls" or "amixer contents" ? Also try to play something with aplay even if you can't set the volume. I need to locate the broken code path a bit more precisely than the whole driver :) Bye. ------------------------------------------------------- Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara The only event dedicated to issues related to Linux enterprise solutions www.enterpriselinuxforum.com