From: Giuliano Pochini Subject: RE: recording issues Date: Thu, 02 Oct 2003 09:36:00 +0200 (CEST) Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <200310011434.29210.n8gray@caltech.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <200310011434.29210.n8gray@caltech.edu> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Nathaniel Gray Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On 01-Oct-2003 Nathaniel Gray wrote: > My sound card uses different devices for capture (device 0) and playback > (device 1). I have two issues with capture right now: > > 1. If I do something like: > arecord -f dat -D hw:0,1 -d 5 foo.wav > it seems to record for much longer than 5 seconds. In fact, "time > arecord..." tells me that it goes for 10 seconds. If I then try to > play back the result with aplay: Try aplay/arecord -v[vvvvvv] to see what parameters have been actually set. You can also put printk()'s in the driver to check what's going on. Why are you using different devices for capture and playback ? Perhaps it's a typo, but if capture is dev 0, you have to type arecord -D hw:0,0 ^ | -- Giuliano. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf