From: Sergey Matyukevich Date: Sat, 6 Feb 2021 23:16:04 +0300 Subject: [Buildroot] [RFC PATCH] stm32mp1: modify gpt partitions to fix BSP update In-Reply-To: <87eeht5bnx.fsf@dell.be.48ers.dk> References: <20210130204456.793098-1-geomatsi@gmail.com> <87eeht5bnx.fsf@dell.be.48ers.dk> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, > > NOTICE: CPU: STM32MP157CAC Rev.B > > NOTICE: Model: STMicroelectronics STM32MP157C-DK2 Discovery Board > > NOTICE: Board: MB1272 Var2.0 Rev.C-01 > > NOTICE: BL2: v2.4(release):2020.11-1087-g8fac193e6d-dirty > > NOTICE: BL2: Built : 20:58:09, Jan 27 2021 > > ERROR: Checksum: 0x5023a37 (awaited: 0x5046ea4) > > ERROR: Header check failed > > ERROR: BL2: Failed to load image id 5 (-12) > > > The root cause is in changes for stm32mp1 trusted defconfig in updated > > U-Boot: see U-Boot commit 76db1681da52 ("stm32mp1: use a specific SD/eMMC > > partition for U-Boot enviromnent"). Starting from that commit, U-Boot > > environment is stored at the end of the U-Boot partition. As a result, > > saving environment changes GPT partition checksum verified by ATF. > > > IIUC at least the following two approaches can be implemented to make > > updated BSP work smoothly. > > > The first approach is to modify U-Boot config fragment for stm32mp1 boards > > and to re-enable saving U-Boot environment on ext4. However this choice > > implies certain restriction on rootfs ext4 features since it should be > > writable by U-Boot. See the mentioned U-Boot commit message for details. > > > Another approach is implemented by the attached patch: keep U-Boot > > environment on a dedicated GPT partition. > > > Thoughts ? Comments ? > > If upstream wants to use a separate partition for the environment, then > that is fine by me - But I would prefer to not patch u-boot and just > name the environment partition ssbl. Sure, I would also prerfer not to patch u-boot. However on stm32mp1 platform, ATF attempts to load BL33 bootloader from 'ssbl' partition. So using this name for environment partition does not work. Regards, Sergey