From: bugtrack@alsa-project.org Subject: [ALSA - driver 0000772]: Analog/Digital output not working. Date: Sat, 1 Jan 2005 10:01:01 +0100 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [82.113.61.162]) by alsa.alsa-project.org (ALSA's E-mail Delivery System) with ESMTP id 02F93324 for ; Sat, 1 Jan 2005 10:01:01 +0100 (MET) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org A NOTE has been added to this issue. ====================================================================== ====================================================================== Reported By: ianw1234 Assigned To: ====================================================================== Project: ALSA - driver Issue ID: 772 Category: PCI - emu10k1 Reproducibility: always Severity: major Priority: normal Status: new Distribution: Kernel Version: 2.6.9-1.681_FC3 ====================================================================== Date Submitted: 12-31-2004 23:02 CET Last Modified: 01-01-2005 10:01 CET ====================================================================== Summary: Analog/Digital output not working. Description: I've been unable to get my SB Live! to send analog pcm out through the Analog/Digital port. It's connected through this port to my receiver, and while AC3 over the digital port works fine, I can't get anything else to go over the line. I have a 48kHz wave file I've been testing, and I've tried playing it with aplay over hw0,0 (no good), hw0,1 (doesn't exist), and hw0,2 (no effect). I have the master, IEC Coaxial, AC97, External amplifier, and SB Live Analog/Digital Output Jack all either unmuted or set to max volume. I've tried loading the snd_pcm_oss module with various snd_dsp_map settings without success. I've tried this on 1.0.7 and 1.0.8rc1. I dimly remember this working in the past, so I don't know if this was broken in the upgrade to 1.0.7 (which I had to do because AC3 passthrough didn't work in the version that came with the 2.6.9 kernel) or whether I have some strange misconfiguration. Help is appreciated! Thanks! ====================================================================== ---------------------------------------------------------------------- rlrevell - 01-01-05 02:28 ---------------------------------------------------------------------- You don't have to do "a bunch of asound trickery", you just have to output to the correct device, as you can see. ---------------------------------------------------------------------- pzad - 01-01-05 10:01 ---------------------------------------------------------------------- Try to play with "IEC958 Optical Raw" switch. Issue History Date Modified Username Field Change ====================================================================== 12-31-04 23:02 ianw1234 New Issue 12-31-04 23:02 ianw1234 Kernel Version => 2.6.9-1.681_FC3 01-01-05 00:33 ianw1234 Note Added: 0003028 01-01-05 02:28 rlrevell Note Added: 0003030 01-01-05 10:01 pzad Note Added: 0003031 ====================================================================== ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt