From: Stefan Roese <sr@denx.de>
Date: Mon, 4 Sep 2017 08:43:56 +0200
Subject: [U-Boot] [next PATCH v2 2/2] ARM: mvebu: add additional
 information to board_add_ram_info()
In-Reply-To: <20170904053832.12229-2-judge.packham@gmail.com>
References: <20170904053832.12229-1-judge.packham@gmail.com>
 <20170904053832.12229-2-judge.packham@gmail.com>
Message-ID: <a9a92a6c-a7ac-575e-94de-2a56c20fd9e0@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 04.09.2017 07:38, Chris Packham wrote:
> From: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
> 
> Display more information about the current RAM configuration. With these
> changes the output on a 88F6820 board is
> 
>    SoC:   MV88F6820-A0 at 1600 MHz
>    DRAM:  2 GiB (800 MHz, 32-bit, ECC not enabled)
> 
> Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
> Signed-off-by: Chris Packham <judge.packham@gmail.com>
> ---
> One of the hardware designers at $dayjob expressed a desire to keep
> track of various tweaks to the DDR setup during hardware debugging
> sessions. This is the result.
> 
> I've based this on what is available for the fsl platforms. It might be
> nice to add a few more things but I'm concious of keeping the
> information relevant and succinct.
> 
> Changes in v2:
> - A375 and A38x have 16/32b DDR bus
> 
>   arch/arm/mach-mvebu/dram.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 45 insertions(+)

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan