From: Pierre-Louis Bossart Subject: Re: [PATCH] ASoC: cht_bsw_rt5672: Use HID translation unit Date: Wed, 30 Nov 2016 08:56:03 -0600 Message-ID: References: <20161125144018.28896-1-tiwai@suse.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by alsa0.perex.cz (Postfix) with ESMTP id CC7D2266912 for ; Wed, 30 Nov 2016 15:56:07 +0100 (CET) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Takashi Iwai , Mark Brown Cc: Vinod Koul , alsa-devel@alsa-project.org, Liam Girdwood List-Id: alsa-devel@alsa-project.org On 11/30/16 7:47 AM, Takashi Iwai wrote: > On Fri, 25 Nov 2016 15:40:18 +0100, > Takashi Iwai wrote: >> >> Instead of hard-coded "i2c-10EC5670:00", use the translation helper to >> avoid the mismatch between i2c-codec and ACPI strings just like what >> we've done for bytcr_rt5640. This gives more robust binding on funky >> devices like Dell Wyse 3040. >> >> Signed-off-by: Takashi Iwai > > Vinod, Pierre, Liam, could you guys review? Sounds ok Reviewed-by: Pierre-Louis Bossart On a side note there may be additional changes for rt5645 and rt5672 drivers since those codecs are apparently used for Baytrail as well, and we need to clock patches to set the MCLK to 19.2MHz explicitly. > > > thanks, > > Takashi > >> --- >> sound/soc/intel/boards/cht_bsw_rt5672.c | 30 ++++++++++++++++++++++++++++-- >> 1 file changed, 28 insertions(+), 2 deletions(-) >> >> diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c >> index df9d254baa18..fe607d8701a0 100644 >> --- a/sound/soc/intel/boards/cht_bsw_rt5672.c >> +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c >> @@ -25,12 +25,14 @@ >> #include >> #include "../../codecs/rt5670.h" >> #include "../atom/sst-atom-controls.h" >> +#include "../common/sst-acpi.h" >> >> /* The platform clock #3 outputs 19.2Mhz clock to codec as I2S MCLK */ >> #define CHT_PLAT_CLK_3_HZ 19200000 >> #define CHT_CODEC_DAI "rt5670-aif1" >> >> static struct snd_soc_jack cht_bsw_headset; >> +static char cht_bsw_codec_name[16]; >> >> /* Headset jack detection DAPM pins */ >> static struct snd_soc_jack_pin cht_bsw_headset_pins[] = { >> @@ -295,7 +297,7 @@ static int cht_suspend_pre(struct snd_soc_card *card) >> struct snd_soc_codec *codec; >> >> list_for_each_entry(codec, &card->codec_dev_list, card_list) { >> - if (!strcmp(codec->component.name, "i2c-10EC5670:00")) { >> + if (!strcmp(codec->component.name, cht_bsw_codec_name)) { >> dev_dbg(codec->dev, "disabling jack detect before going to suspend.\n"); >> rt5670_jack_suspend(codec); >> break; >> @@ -309,7 +311,7 @@ static int cht_resume_post(struct snd_soc_card *card) >> struct snd_soc_codec *codec; >> >> list_for_each_entry(codec, &card->codec_dev_list, card_list) { >> - if (!strcmp(codec->component.name, "i2c-10EC5670:00")) { >> + if (!strcmp(codec->component.name, cht_bsw_codec_name)) { >> dev_dbg(codec->dev, "enabling jack detect for resume.\n"); >> rt5670_jack_resume(codec); >> break; >> @@ -335,9 +337,33 @@ static struct snd_soc_card snd_soc_card_cht = { >> .resume_post = cht_resume_post, >> }; >> >> +#define RT5672_I2C_DEFAULT "i2c-10EC5670:00" >> + >> static int snd_cht_mc_probe(struct platform_device *pdev) >> { >> int ret_val = 0; >> + struct sst_acpi_mach *mach = pdev->dev.platform_data; >> + const char *i2c_name; >> + int i; >> + >> + strcpy(cht_bsw_codec_name, RT5672_I2C_DEFAULT); >> + >> + /* fixup codec name based on HID */ >> + if (mach) { >> + i2c_name = sst_acpi_find_name_from_hid(mach->id); >> + if (i2c_name) { >> + snprintf(cht_bsw_codec_name, sizeof(cht_bsw_codec_name), >> + "i2c-%s", i2c_name); >> + for (i = 0; i < ARRAY_SIZE(cht_dailink); i++) { >> + if (!strcmp(cht_dailink[i].codec_name, >> + RT5672_I2C_DEFAULT)) { >> + cht_dailink[i].codec_name = >> + cht_bsw_codec_name; >> + break; >> + } >> + } >> + } >> + } >> >> /* register the soc card */ >> snd_soc_card_cht.dev = &pdev->dev; >> -- >> 2.10.2 >> >> _______________________________________________ >> Alsa-devel mailing list >> Alsa-devel@alsa-project.org >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel >>