Return-Path: Received: from smtp2.it.da.ut.ee ([193.40.5.67]:33666 "EHLO smtp2.it.da.ut.ee" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932751AbeGFTNC (ORCPT ); Fri, 6 Jul 2018 15:13:02 -0400 Date: Fri, 6 Jul 2018 22:12:59 +0300 (EEST) From: Meelis Roos To: Linux Kernel list , linux-pci@vger.kernel.org Subject: HH DL585 warm boot fail (old) Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: linux-pci-owner@vger.kernel.org List-ID: I have a first gen HP Proliant DL585 ("G1" but the name was not used back then) that boots up fine from poweron but usually fails bootup from warm reboot, somewhere in PCI detection (will try to photographs the screen some time). I just stumbled upon an old OpenSolaris thead about the same DL585 and same symptoms: http://opensolaris-discuss.opensolaris.narkive.com/T0UTXYGZ/solaris-10-06-06-x86-hp-dl585-boot-hang-aftrer-reboot-help Their conclusion was the wfollowing and they seem to have found a fix (although I have not tested any version of Solaris on this DL585 myself): "The hang is caused when, during PCI enumeration, a PCI-PCI bridge is partially disabled when the PCI command register bits which enable IO and memory windows are cleared." Is this information useful in some way for debugging it? What else besides screenshot of the can be useful in debugging? -- Meelis Roos (mroos@linux.ee)