From: Meelis Roos Subject: Re: Radeon RV100 init fails with specific card+mobo - IRQ problem Date: Fri, 1 Feb 2013 17:26:43 +0200 (EET) Message-ID: References: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Jerome Glisse Cc: Alex Deucher , Linux Kernel list , dri-devel@lists.freedesktop.org List-Id: dri-devel@lists.freedesktop.org > > Adding some printks reveals it calls > > r100_init() -> radeon_irq_kms_init() -> drm_irq_install() -> > > drm_dev_to_irq() and that fails. So no IRQ, no KMS. > > > > lspci does not show Interrupt like on some other PCI devices. > > /proc/interrupts obviously does not contain the irq since we do not > > register any yet. > > > > There is no BIOS option of "Enable IRQ for VGA" or similar (BIOS is > > latest). Could this be the problem? > > > > What can I do to get KMS working on this computer? > > > > -- > > Meelis Roos (mroos@linux.ee) > > Try booting with radeon.agp_mode=-1 radeon: `-1' invalid for parameter `agp_mode' -- Meelis Roos (mroos@linux.ee)