From: Stefan Roese Date: Wed, 26 Jun 2019 12:37:00 +0200 Subject: [U-Boot] Watchdog DM conversion, sram overflow(SPL) In-Reply-To: References: Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 26.06.19 11:53, Suniel Mahesh wrote: > Hi, > > I am trying to convert watchdog driver(omap3_wdt) on TI AM33XX platform to Driver Model. > Since DM is also enabled in SPL, size of SPL image generated(with watchdog DM enabled) is > bigger compared to the SRAM size(.u_boot_list section doesn't fit in the region alloted) > and build is failing with the following error: > > LD spl/drivers/usb/gadget/built-in.o > LD spl/drivers/usb/musb-new/built-in.o > LD spl/drivers/built-in.o > LD spl/u-boot-spl > arm-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram' > arm-linux-ld.bfd: region `.sram' overflowed by 48 bytes > make[1]: *** [spl/u-boot-spl] Error 1 > make: *** [spl/u-boot-spl] Error 2 > > The SRAM size in the device is 130047 bytes, of which 110592 bytes are allocated for SPL > Image, 6144 bytes for stack and the rest 12799 bytes for RAM Exec vectors, tracing data > and static variables. > > Maximum SPL image size is fixed at 110592 bytes > > SPL size without Watchdog driver model is 110880 bytes. > > So, the reason for such error is straight forward. > > I can think of two possible approaches (might be wrong): > > 1. either disable DM in SPL for watchdog ? > (dm: mmc: Allow disabling driver model in SPL - by Simon Glass) > > 2. The stack allocated for SPL in SRAM is 6KB and 12799 bytes for RAM Exec vectors, > tracing data and static variables. can we do something here, by borrowing some bytes ? > > Or any possible solutions ? You could also disable the watchdog in SPL and only enable it later in U-Boot proper. Thanks, Stefan