From: Alexandru Marginean Date: Fri, 8 Nov 2019 13:16:52 +0100 Subject: [U-Boot] [PATCH v2 3/4] drivers: mux: mmio-based syscon mux controller In-Reply-To: <20191105115019.25484-4-jjhiblot@ti.com> References: <20191105115019.25484-1-jjhiblot@ti.com> <20191105115019.25484-4-jjhiblot@ti.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi JJ, On 11/5/2019 12:50 PM, Jean-Jacques Hiblot wrote: > This adds a driver for mmio-based syscon multiplexers controlled by > bitfields in a syscon register range. > This is heavily based on the linux mmio-mux driver. > > Signed-off-by: Jean-Jacques Hiblot > --- > > Changes in v2: None > > drivers/mux/Kconfig | 15 +++++ > drivers/mux/Makefile | 1 + > drivers/mux/mmio.c | 155 +++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 171 insertions(+) > create mode 100644 drivers/mux/mmio.c > do you plan to add support for reg-mux too, for parent devices which are not syscon? Thanks! Alex