From: Romain Naour Date: Sat, 21 Nov 2020 12:03:16 +0100 Subject: [Buildroot] [PATCH v4 5/5] board: add nvidia jetson nano support In-Reply-To: <20201119075328.8599-5-christian@paral.in> References: <20201119075328.8599-1-christian@paral.in> <20201119075328.8599-5-christian@paral.in> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Christian, Le 19/11/2020 ? 08:53, Christian Stewart a ?crit?: > Signed-off-by: Christian Stewart > > --- > > v3 -> v4: > > - thanks Romain for the review > - cjs: added gcc + binutils version specifiers > - tested against devkit hardware > > Signed-off-by: Christian Stewart > --- > board/jetson/nano/format-sd.sh | 167 +++++++++++++++++++++++++++++++++ > board/jetson/nano/readme.txt | 57 +++++++++++ > board/jetsonnano | 1 + > configs/jetsonnano_defconfig | 64 +++++++++++++ > 4 files changed, 289 insertions(+) > create mode 100644 board/jetson/nano/format-sd.sh > create mode 100644 board/jetson/nano/readme.txt > create mode 120000 board/jetsonnano > create mode 100644 configs/jetsonnano_defconfig > > diff --git a/board/jetson/nano/format-sd.sh b/board/jetson/nano/format-sd.sh > new file mode 100644 > index 0000000000..1d3b6c442a > --- /dev/null > +++ b/board/jetson/nano/format-sd.sh > @@ -0,0 +1,167 @@ > +#!/bin/bash > +set -eo pipefail > + > +# NOTE: The following copyright applies to linux4tegra and associated tools: > + > +# Copyright (c) 2019-2020, NVIDIA Corporation. All Rights Reserved. > +# > +# NVIDIA Corporation and its licensors retain all intellectual property > +# and proprietary rights in and to this software, related documentation > +# and any modifications thereto. Any use, reproduction, disclosure or > +# distribution of this software and related documentation without an express > +# license agreement from NVIDIA Corporation is strictly prohibited. > + > +if [ $EUID != 0 ]; then > + echo "This script requires root." > +fi > + > +if [ -z "$NVIDIA_SD" ]; then > + echo "Please set NVIDIA_SD and try again." > + exit 1 > +fi > + > +if [ ! -b "$NVIDIA_SD" ]; then > + echo "$NVIDIA_SD is not a block device or doesn't exist." > + exit 1 > +fi > + > +IMAGES_DIR=$1 > +if [ -z $IMAGES_DIR ]; then > + echo "usage: $0 path/to/images/dir" > + exit 1 > +fi > + > +uimg_path=$IMAGES_DIR/Image > +if [ ! -f "$uimg_path" ]; then > + echo "Image not found, make sure Buildroot is done compiling." > + exit 1 > +fi > + > +l4t_tools_path=$IMAGES_DIR/linux4tegra/tools > +if [ ! -d $l4t_tools_path ]; then > + echo "linux4tegra tools not found, ensure buildroot is done compiling." > + exit 1 > +fi > + > +# jetson-nano > +boardid="3448" > +target="jetson-nano-qspi-sd" > +storage="sdcard" > +rev="300" # from 100, 200, 300 > +chipid="0x21" > + > +l4t_dir=${IMAGES_DIR}/linux4tegra > +rootfs_img=$IMAGES_DIR/rootfs.ext2 > + > +# TODO: dynamic rootfs size: the following /almost/ works: > +#rootfs_size=$(du -ms ${rootfs_img} | awk '{print $1}') > +#rootfs_size=$((rootfs_size + (rootfs_size / 10))) > + > +rootfs_size=2048 > + > +echo "creating signed images" > +pushd ${l4t_dir} > +export BOARDID="${boardid}" > +export FAB="${rev}" > + > +${l4t_dir}/flash.sh \ > + --no-flash \ > + --sign \ > + --no-systemimg \ > + -x ${chipid} \ > + -B ${boardid} \ > + -S "${rootfs_size}MiB" \ > + -I $IMAGES_DIR/rootfs.ext2 \ > + -K $IMAGES_DIR/u-boot-dtb.bin \ > + -d $IMAGES_DIR/tegra210-p3448-0000-p3449-0000-b00.dtb \ > + "${target}" "mmcblk0p1" > +popd > + > +bootloader_dir=${l4t_dir}/bootloader > +if [ ! -f "${bootloader_dir}/flashcmd.txt" ]; then > + echo "ERROR: ${bootloader_dir}/flashcmd.txt not found" > + exit 1 > +fi > + > +signed_image_dir=${bootloader_dir}/signed > +if [ ! -d "${signed_image_dir}" ]; then > + echo "ERROR: ${signed_image_dir} not found" > + exit 1 > +fi > + > +chipid=$(sed -nr 's/.*chip ([^ ]*).*/\1/p' "${bootloader_dir}/flashcmd.txt") > +if [ "${chipid}" = "0x21" ]; then > + signed_cfg="flash.xml" > +else > + signed_cfg="flash.xml.tmp" > +fi > + > +if [ ! -f "${signed_image_dir}/${signed_cfg}" ]; then > + echo "ERROR: ${signed_image_dir}/${signed_cfg} not found" > + exit 1 > +fi > + > +echo "create partitions" > +partitions=($(${l4t_tools_path}/nvptparser.py "${signed_image_dir}/${signed_cfg}" "${storage}")) > +part_type=8300 # Linux Filesystem > + > +sgdisk -og "${NVIDIA_SD}" > +for part in "${partitions[@]}"; do > + eval "${part}" > + if [ "${part_name}" = "master_boot_record" ]; then > + continue > + fi > + part_size=$((${part_size} / 512)) # convert to sectors > + sgdisk -n "${part_num}":0:+"${part_size}" \ > + -c "${part_num}":"${part_name}" \ > + -t "${part_num}":"${part_type}" "${NVIDIA_SD}" > +done > + > +# prefer root partprobe > +PARTPROBE=partprobe > +if [ -f /usr/sbin/partprobe ]; then > + PARTPROBE=/usr/sbin/partprobe > +fi This requires partprobe installed on the build machine. partprobe is available in HOST_DIR (see HOST_DIR/sbin/partprobe) > + > +$PARTPROBE ${NVIDIA_SD} || true > +sleep 1 > +if $PARTPROBE ${NVIDIA_SD}; then > + # wait for partitions to settle > + sleep 1 > +fi > + > +echo "write partitions" > +for part in "${partitions[@]}"; do > + eval "${part}" > + target_file="" > + if [ "${part_name}" = "APP" ]; then > + target_file="${IMAGES_DIR}/rootfs.ext2" # Buildroot target system. > + elif [ -e "${signed_image_dir}/${part_file}" ]; then > + target_file="${signed_image_dir}/${part_file}" > + elif [ -e "${bootloader_dir}/${part_file}" ]; then > + target_file="${bootloader_dir}/${part_file}" > + fi > + > + echo "writing partition ${part_name}" > + if [ "${part_name}" = "master_boot_record" ]; then > + echo "writing ${part_file}" > + dd conv=notrunc conv=fsync if="${signed_image_dir}/${part_file}" of="${NVIDIA_SD}" bs="${part_size}" count=1 > + continue > + fi > + > + if [ "${target_file}" != "" ] && [ "${part_file}" != "" ]; then > + echo "writing ${target_file}" > + target_part=${NVIDIA_SD}p${part_num} > + if [ ! -b ${target_part} ]; then > + target_part=${NVIDIA_SD}${part_num} > + fi > + if [ ! -b ${target_part} ]; then > + echo "Partition block device ${target_part} or ${NVIDIA_SD}p${part_num} does not exist!" > + exit 1 > + fi > + sudo dd conv=fsync if="${target_file}" of="${target_part}" > + fi > +done > + > +echo "Successfully flashed $NVIDIA_SD" > + > diff --git a/board/jetson/nano/readme.txt b/board/jetson/nano/readme.txt > new file mode 100644 > index 0000000000..8161c7e60f > --- /dev/null > +++ b/board/jetson/nano/readme.txt > @@ -0,0 +1,57 @@ > +NVIDIA Jetson Nano > + > +Intro > +===== > + > +This configuration adds support for the Jetson Nano devkit. > + > +Building > +======== > + > +Configure Buildroot > +------------------- > + > +For Jetson Nano: > + > + $ make jetsonnano_defconfig > + > +Build the rootfs > +---------------- > + > +You may now build your rootfs with: > + > + $ make > + > + > +Flashing > +======== > + > +Once the build process is finished you will have the target binaries in the > +output/images directory with a copy of linux4tegra. > + > +To format your SD card with the required partition layout, use the > +"format-sd.sh" script located under board/jetson/nano/format-sd.sh: > + > + sudo \ > + NVIDIA_SD=/dev/sdX \ > + PATH=$(pwd)/output/host/sbin:$PATH \ > + bash board/jetson/nano/format-sd.sh ./output/images > + > +This will also flash the ext4 rootfs image to the SD card. > + > +Bootup Process > +============== > + > +The Jetson Nano can boot to a SD card. > + > +A "secure boot" process is used, with multiple bootloaders: > + > + - BootROM -> MB1 (TrustZone) > + - MB2/BPMP -> (Non-Trustzone) > + - Cboot (uses Little Kernel) > + - Uboot > + - Kernel > + > +Cboot could be compiled from source, and the source is available from the > +official sources, however, we do not (yet) compile cboot. > + > diff --git a/board/jetsonnano b/board/jetsonnano > new file mode 120000 > index 0000000000..808abfb405 > --- /dev/null > +++ b/board/jetsonnano > @@ -0,0 +1 @@ > +./jetson/nano > \ No newline at end of file > diff --git a/configs/jetsonnano_defconfig b/configs/jetsonnano_defconfig > new file mode 100644 > index 0000000000..e2ec18616f > --- /dev/null > +++ b/configs/jetsonnano_defconfig > @@ -0,0 +1,64 @@ > +BR2_aarch64=y > +BR2_cortex_a57=y > +BR2_ARM_FPU_FP_ARMV8=y > + > +# enable specific optimizations > +BR2_TARGET_OPTIMIZATION="-march=armv8-a+crypto -mcpu=cortex-a57+crypto" > + > +# Toolchain reference: docs.nvidia.com: "Jetson Linux Driver Package Toolchain" > +BR2_TOOLCHAIN_BUILDROOT=y > +BR2_TOOLCHAIN_BUILDROOT_CXX=y > +BR2_TOOLCHAIN_BUILDROOT_GLIBC=y > +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y > +BR2_TOOLCHAIN_BUILDROOT_LOCALE=y > +BR2_BINUTILS_VERSION_2_32_X=y > +BR2_GCC_VERSION_7_X=y > +BR2_GCC_ENABLE_LTO=n Same as for jetson-tx2. Best regards, Romain > +BR2_USE_MMU=y > + > +BR2_SYSTEM_DHCP="eth0" > + > +# Linux headers same as kernel, a 4.9 series > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y > +BR2_KERNEL_HEADERS_AS_KERNEL=y > + > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > +# patches-l4t-r32.4 > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,madisongh,linux-tegra-4.9,0be1a57448010ae60505acf4e2153638455cee7c)/linux-tegra-4.9.140-r1.tar.gz" > +BR2_LINUX_KERNEL_DEFCONFIG="tegra" > + > +# Build the DTB from the kernel sources > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="_ddot_/_ddot_/_ddot_/_ddot_/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02 _ddot_/_ddot_/_ddot_/_ddot_/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00" > + > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > + > +BR2_PACKAGE_LINUX4TEGRA=y > +BR2_PACKAGE_LINUX4TEGRA_PLATFORM_T210REF=y > + > +# TODO: NVIDIA_CONTAINER_TOOLKIT requires a go-module integration. > +# BR2_PACKAGE_NVIDIA_CONTAINER_TOOLKIT=y > + > +BR2_PACKAGE_LINUX_FIRMWARE=y > +BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y > + > +# Required tools to create the image > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_JQ=y > +BR2_PACKAGE_HOST_PARTED=y > + > +# Filesystem / image > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_ROOTFS_EXT2_SIZE="1024M" > +# BR2_TARGET_ROOTFS_TAR is not set > + > +# Uboot > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="p3450-porg" > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y > +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,paralin,u-boot-tegra,45dfa3dff43f880243a9fe68f3d911e99a240654)/u-boot-tegra-l4t-r32.4.2-v2016.07.tar.gz" > +BR2_TARGET_UBOOT_FORMAT_DTB_BIN=y > +BR2_TARGET_UBOOT_NEEDS_DTC=y >