From: "Alexander Sirotkin" Date: Wed, 28 Mar 2007 16:13:06 +0000 Subject: [LARTC] strict priority Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I'm trying to configure 4 queues with strict priorities based on DSCP. I tried to following commands, but it seems that the filters I defined have no effect tc qdisc add dev eth0 root handle 1: prio bands 4 tc qdisc add dev eth0 parent 1:0 handle 10: pfifo limit 100 tc qdisc add dev eth0 parent 1:1 handle 20: pfifo limit 100 tc qdisc add dev eth0 parent 1:2 handle 30: pfifo limit 100 tc qdisc add dev eth0 parent 1:3 handle 40: pfifo limit 100 tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip tos 224 0xff flowid 10: tc filter add dev eth0 parent 1:0 protocol ip prio 2 u32 match ip tos 160 0xff flowid 20: tc filter add dev eth0 parent 1:0 protocol ip prio 3 u32 match ip tos 0 0xff flowid 30: tc filter add dev eth0 parent 1:0 protocol ip prio 4 u32 match ip tos 32 0xff flowid 40: Any suggestions ? _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc