Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id n14CbYwS025357 for ; Wed, 4 Feb 2009 07:37:34 -0500 Received: from yw-out-2324.google.com (yw-out-2324.google.com [74.125.46.30]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id n14CbI6w029489 for ; Wed, 4 Feb 2009 07:37:18 -0500 Received: by yw-out-2324.google.com with SMTP id 5so815454ywb.81 for ; Wed, 04 Feb 2009 04:37:18 -0800 (PST) MIME-Version: 1.0 Date: Wed, 4 Feb 2009 18:07:18 +0530 Message-ID: From: halli manjunatha To: video4linux-list@redhat.com Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Missing first 4 frames List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hi , I am working on omap3 custom board and using the TI's camera patches on 2.6.28 kernel and the problem is that first 4 frames are coming 1/4 of HVGA but i am capturing HVGA images. after 4 frames everything is normal. I don't wether it is the right list to say this problem, please guid me where to look, following is my register dump ###CM_FCLKEN_CAM=0x3 ###CM_ICLKEN_CAM=0x1 ###CM_CLKSEL_CAM=0x4 ###CM_AUTOIDLE_CAM=0x1 ###CM_CLKEN_PLL[18:16] should be 0x7, = 0x90371037 ###CM_CLKSEL2_PLL[18:8] should be 0x2D, [6:0] should be 1 = 0x1b00c ###CTRL_PADCONF_CAM_HS=0x1080108 ###CTRL_PADCONF_CAM_XCLKA=0x1080108 ###CTRL_PADCONF_CAM_D1=0x1000100 ###CTRL_PADCONF_CAM_D3=0x1080100 ###CTRL_PADCONF_CAM_D5=0x1080108 ###CTRL_PADCONF_CAM_D7=0x1080108 ###CTRL_PADCONF_CAM_D9=0x1080108 ###CTRL_PADCONF_CAM_D11=0x108 ###ISP_CTRL=0x3bf188 ###ISP_TCTRL_CTRL=0x9 ###ISP_SYSCONFIG=0x2000 ###ISP_SYSSTATUS=0x1 ###ISP_IRQ0ENABLE=0x90000300 ###ISP_IRQ0STATUS=0x0 ###CCDC PCR=0x1 ISP_CTRL =0x3bf188 ###ISP_CTRL in ccdc =0x3bf188 ###ISP_IRQ0ENABLE in ccdc =0x90000300 ###ISP_IRQ0STATUS in ccdc =0x0 ###CCDC SYN_MODE=0x31700 ###CCDC HORZ_INFO=0x13f ###CCDC VERT_START=0x0 ###CCDC VERT_LINES=0x1df ###CCDC CULLING=0xffff00ff ###CCDC HSIZE_OFF=0x280 ###CCDC SDOFST=0x0 ###CCDC SDR_ADDR=0x4000000 ###CCDC CLAMP=0x10 ###CCDC COLPTN=0x0 ###CCDC CFG=0x8000 ###CCDC VP_OUT=0x0 ###CCDC_SDR_ADDR= 0x4000000 ###CCDC FMTCFG=0x4000 ###CCDC FMT_HORZ=0x0 ###CCDC FMT_VERT=0x0 ###CCDC LSC_CONFIG=0x6600 ###CCDC LSC_INIT=0x0 ###CCDC LSC_TABLE BASE=0x0 ###CCDC LSC TABLE OFFSET=0x0 Thanks in advance -- Regards Hall -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list