From: Stefano Babic Date: Tue, 17 Sep 2019 10:27:46 +0200 Subject: [U-Boot] [PATCH 2/4] habv4: tools: Avoid hardcoded CSF size for SPL targets In-Reply-To: References: <1563453220-248-1-git-send-email-breno.lima@nxp.com> <1563453220-248-3-git-send-email-breno.lima@nxp.com> <2651d79f-cc3f-19fb-4cf7-eeb0071685d0@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: u-boot@lists.denx.de On 17/09/19 05:26, Breno Matheus Lima wrote: > Hi Stefano, >=20 > Em seg, 16 de set de 2019 =C3=A0s 05:17, Stefano Babic e= screveu: >> >> Hi Breno, >> >> On 12/09/19 03:07, Peng Fan wrote: >>> Hi Breno, >>> >>>> Subject: [PATCH 2/4] habv4: tools: Avoid hardcoded CSF size for SPL ta= rgets >>> >>> I saw this patch in imx/master, not in Tom's tree. But this patch breaks >>> build for other archs, such as arc and etc. >>> >> >> Any news on this ? I dropped it from u-boot-imx due the breakage, but I >> can easy pick it up again if it will be fixed. >> >=20 > Sorry the delay. I'm still trying to reproduce the issue, probably > something is missing in my buildman setup. It looks like that a header is missing, maybe this came together with the moving to a common place for gzip & Co (patch for Simon). I think it could be easy for you to reproduce if you set current u-boot-imx. >=20 > One workaround would be to enclose the code with CONFIG_SECURE_BOOT, > this code is only used by IH_TYPE_FIRMWARE_IVT which requires HAB to > be enabled. I can send a patch but I would like to confirm before. Nevertheless, HAB code should be put in just if needed. I agree on the patch independently from the issue. Regards, Stefano >=20 > Thanks, > Breno Lima >=20 --=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D