From: bugtrack@alsa-project.org Subject: [ALSA - driver 0001199]: oops with pdaudiocf after data stream abort Date: Mon, 22 Aug 2005 13:09:52 +0200 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [82.113.61.162]) by alsa.jcu.cz (ALSA's E-mail Delivery System) with ESMTP id 8DB3220D for ; Mon, 22 Aug 2005 13:09:52 +0200 (MEST) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org The following issue has been RESOLVED. ====================================================================== ====================================================================== Reported By: zwelch Assigned To: perex ====================================================================== Project: ALSA - driver Issue ID: 1199 Category: PCMCIA - pdaudiocf Reproducibility: always Severity: crash Priority: normal Status: resolved Distribution: Gentoo Kernel Version: 2.6.11.12 Resolution: won't fix Fixed in Version: ====================================================================== Date Submitted: 06-17-2005 02:50 CEST Last Modified: 08-22-2005 13:09 CEST ====================================================================== Summary: oops with pdaudiocf after data stream abort Description: The following oops report was generated while using `arecord | aplay` from the 1.0.9 alsa-utils release. It was triggered by unplugging the pre-amp while recording, thus causing the optical signal to disappear unexpectedly. As it is, I need both the pdaudiocf and powermac drivers working, or I would be using the out-of-kernel alsa-driver package. The powermac driver in 1.0.9a can't find the symbol 'macio_find', which I have reported separately (bug #1198). Once that bug is fixed, I can retest this issue with the most current release, but I hope patches might be applied to 2.6.11.12 to fix this problem. I can provide additional information about the kernel configuration, installed package versions, run further tests, or try possible patches. ====================================================================== ---------------------------------------------------------------------- perex - 06-20-05 11:52 ---------------------------------------------------------------------- The culprit of this oops is not obvious. Could you try to remove snd_pcm_stop() line from i2c/other/ak4114.c file? ---------------------------------------------------------------------- perex - 08-22-05 13:09 ---------------------------------------------------------------------- No response. Issue History Date Modified Username Field Change ====================================================================== 06-17-05 02:50 zwelch New Issue 06-17-05 02:50 zwelch Distribution => Gentoo 06-17-05 02:50 zwelch Kernel Version => 2.6.11.12 06-19-05 09:58 zwelch Note Added: 0005086 06-20-05 11:52 perex Note Added: 0005096 08-22-05 13:09 perex Status assigned => resolved 08-22-05 13:09 perex Resolution open => won't fix 08-22-05 13:09 perex Note Added: 0005895 ====================================================================== ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf