From: andersvi@extern.uio.no Subject: Re: vxpocket 440 with alsa, problems with vxloader Date: Fri, 14 Jan 2005 15:30:24 +0100 Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: In-Reply-To: (Takashi Iwai's message of "Fri, 14 Jan 2005 13:09:21 +0100") Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Takashi Iwai Cc: alsa-user@lists.sourceforge.net, alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Thanks alot for response. It got me further, but still no sound out. Anybody got a clue where this gets wrong? >>> "TI" == Takashi Iwai writes: >> alsa is version 1.0.7 TI> vxpocket/vxp440 driver in ALSA 1.0.7 has a severe bug. TI> Try ALSA 1.0.8 instead. TI> TI> On ALSA 1.0.8, the firmware is loaded via hotplug automatically, so TI> you don't need vxloader. (It's only for 2.6 kernels.) TI> Don't forget to update alsa-firmware, too. With alsa-1.0.8, and upgraded firmware it behaves as follows. Pcmcia card is card-1, builtin sound is card-0: $ alsamixer -c1 alsamixer: function snd_ctl_open failed for hw:1: No such device Plugging in the card gives output: $ alsamixer -c1 No mixer elems found And trying to play through the pcmcia-card does not work: $ aplay -D hw:0,0 test.wav Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo $ aplay -D hw:1,0 test.wav ALSA lib pcm_hw.c:1174:(snd_pcm_hw_open) open /dev/snd/pcmC1D0p failed: No such device aplay: main:508: audio open error: No such device Seems the card is detected $ cat /proc/asound/cards 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with STAC9750/51 at 0xf4fff800, irq 17 1 [VXPocket440 ]: VXPocket440 - Digigram VXPocket440 Digigram VXPocket440 at 0x100, irq 3 But all "parameters" are set to zero or something. $ cat /proc/asound/card1/vx-status Digigram VXPocket440 at 0x100, irq 3 DSP audio info: Input Source: Line Clock Mode: Auto Clock Source: Internal Frequency: 0 Detected Frequency: 0 Detected UER type: Consumer Min/Max/Cur IBL: 0/0/0 (granularity=0) $ cat /proc/asound/devices 0: [0- 0]: ctl 20: [0- 4]: digital audio playback 27: [0- 3]: digital audio capture 26: [0- 2]: digital audio capture 25: [0- 1]: digital audio capture 16: [0- 0]: digital audio playback 24: [0- 0]: digital audio capture 1: : sequencer 33: : timer 32: [1- 0]: ctl 36: [1- 0]: hardware dependent $ uname -a Linux localhost 2.6.10-2.1.ll.rhfc2.ccrma #1 Thu Dec 30 06:24:24 EST 2004 i686 i686 i386 GNU/Linux $ ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt