From: Christophe Leroy Date: Fri, 16 Mar 2018 17:32:38 +0100 (CET) Subject: [U-Boot] [PATCH RFCv2 0/6] Beginning of migration of MPC8xx to DM model Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This serie is the beginning of MPC8xx migration to DM model. It applies on top of the serie "[v4] Powerpc: mpc8xx: cleanup before migration to DM model" Christophe Leroy (6): board: MCR3000: Activate CONFIG_DM and CONFIG_OF_CONTROL drivers: watchdog: add a DM driver for the MPC8xx watchdog board: MCR3000: use new DM watchdog drivers: serial: migrate mpc8xx to DM board: MCR3000: migrate to DM_SERIAL drivers: serial: get rid of non DM mpc8xx driver Change since initial RFC: Migrated serial driver in addition Few changes on the watchdog arch/powerpc/dts/Makefile | 16 ++++++++++ arch/powerpc/dts/mcr3000.dts | 22 ++++++++++++++ board/cssi/MCR3000/MCR3000.c | 16 ++++++++++ board/cssi/MCR3000/u-boot.lds | 6 ++++ configs/MCR3000_defconfig | 6 ++++ drivers/serial/serial.c | 2 -- drivers/serial/serial_mpc8xx.c | 66 ++++++++++++++++++++++-------------------- drivers/watchdog/Kconfig | 7 +++++ drivers/watchdog/mpc8xx_wdt.c | 51 ++++++++++++++++++++++++++++++++ include/configs/MCR3000.h | 1 + include/serial.h | 1 - 11 files changed, 159 insertions(+), 35 deletions(-) create mode 100644 arch/powerpc/dts/Makefile create mode 100644 arch/powerpc/dts/mcr3000.dts -- 2.13.3