From: Amit Kucheria Subject: [PATCH v2 0/4] thermal: tsens: Add support for QCS404 platform Date: Mon, 19 Nov 2018 17:55:18 +0530 Message-ID: Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org, bjorn.andersson@linaro.org, edubezval@gmail.com, andy.gross@linaro.org, vkoul@kernel.org, Daniel Lezcano , devicetree@vger.kernel.org, linux-pm@vger.kernel.org, linux-soc@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org Add support for the Qualcomm QCS404 platform that contains v1 of the TSENS IP. Introduce a fallback binding to handle "v1" functionality. These patches have been tested on top of 4.20-rc3 + various qcs404-related DT patches now in Andy's ci-next branch[1]. Changes since v1: - Change p1 and p2 to be fixed-size arrays - Refactor DT entries to be sorted by address, Thanks Vinod - Added Acks [1] https://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git/log/?h=ci-next Amit Kucheria (4): dt: thermal: tsens: Add bindings for qcs404 drivers: thermal: tsens: Add generic support for TSENS v1 IP arm64: dts: qcom: qcs404: Add tsens controller arm64: dts: qcom: qcs404: Add thermal zones for each sensor .../bindings/thermal/qcom-tsens.txt | 3 + arch/arm64/boot/dts/qcom/qcs404.dtsi | 226 ++++++++++++++++++ drivers/thermal/qcom/Makefile | 2 +- drivers/thermal/qcom/tsens-v1.c | 196 +++++++++++++++ drivers/thermal/qcom/tsens.c | 3 + drivers/thermal/qcom/tsens.h | 2 +- 6 files changed, 430 insertions(+), 2 deletions(-) create mode 100644 drivers/thermal/qcom/tsens-v1.c -- 2.17.1