From: Adam Thomson Subject: [PATCH v2 0/2] ASoC: da7219: BCLK and TDM flexibility improvements Date: Thu, 14 Feb 2019 10:13:28 +0000 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mail1.bemta26.messagelabs.com (mail1.bemta26.messagelabs.com [85.158.142.1]) by alsa0.perex.cz (Postfix) with ESMTP id B8E3F267482 for ; Thu, 14 Feb 2019 11:13:32 +0100 (CET) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Mark Brown , Liam Girdwood , Takashi Iwai , Jaroslav Kysela Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Support Opensource , Akshu Agrawal List-Id: alsa-devel@alsa-project.org This patch set updates the driver to be more flexible regarding the BCLK and TDM configurations of the device. Previously the BCLK rate was fixed at 64 periods per WCLK, when the codec is DAI clock master, but to satisfy devices which prefer a lower rate, and to save power, the BCLK rate is now calculated based on hw_params() data. As a fallout of the BCLK efforts it was also apparent that the TDM code could be made more flexible as well. The device is capable of automatically detecting the BCLK rate when it is clock slave, so previous limitations imposed were not necessary. The mask handling is now used as an input to determine the BCLK offset to align closer with other examples within ALSA. Changes in v2: - Update 0001 patch to use '&&' instead of '&' in hw_params() to decide if BCLK rate should be configured or not. Adam Thomson (2): ASoC: da7219: Add support for master mode BCLK rate adjustment ASoC: da7219: Update TDM usage to be more flexible sound/soc/codecs/da7219.c | 116 +++++++++++++++++++++++++++++----------------- sound/soc/codecs/da7219.h | 1 + 2 files changed, 74 insertions(+), 43 deletions(-) -- 1.9.1