DMARC-Filter: OpenDMARC Filter v1.4.2 smtp.subspace.kernel.org 5FC89606A336
From: Enzo Adriano <enzo.adriano.code@gmail.com>
To: andre.przywara@arm.com,
	robh@kernel.org,
	krzk+dt@kernel.org,
	conor+dt@kernel.org,
	wens@kernel.org,
	jernej.skrabec@gmail.com,
	samuel@sholland.org
Cc: Maxime Ripard <mripard@kernel.org>,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev,
	linux-kernel@vger.kernel.org,
	Junhui Liu <junhui.liu@pigmoral.tech>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Pablo Mazzini <pmazzini@gmail.com>,
	Vinicius Pedrosa <vinicius.eduardo.pedrosa@gmail.com>,
	Alexander Sverdlin <alex@sverdlin.org>,
	Jun Yan <jerrysteve1101@gmail.com>,
	Lukas Schmid <lukas.schmid@netcube.li>
Subject: [PATCH v3 0/3] arm64: dts: allwinner: add A733/Cubie A7S support
Date: Mon,  9 Nov 2026 23:45:15 -0500
Message-ID: <cover.1794227241.git.enzo.adriano.code@gmail.com>
Precedence: list
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

This series adds the initial Allwinner A733 and Radxa Cubie A7S device
trees, enabling UART0, the AXP318W PMIC and the 3.3 V microSD path.

Base: v7.4-rc1 (6628e7d4c6b25c8d18f1345e3a20d21829aae7e4).
Previous posting (v2):
https://lore.kernel.org/r/20261031020640-263f7b05-a7s-dt-v2-0@gmail.com

Changes in v3:
- Defer SMHC3/mmc3 until it has a tested user; omit binding, node and pins.
- Rebase on v7.4-rc1 and list public schema prerequisites.

Dependencies, in application order:
[1] A733 CCU v6:
https://lore.kernel.org/r/20261009-a733-clk-v6-0-ae8178fce7e8@pigmoral.tech
[2] AXP318W PMIC v8:
https://lore.kernel.org/r/20260910-axp318-regulator-v8-0-e906a61a7f3d@baylibre.com
[3] Pinctrl IRQ-bank v3:
https://lore.kernel.org/r/20261025142412.112216-1-pmazzini@gmail.com
[4] A733 8250_dw v2, patches 2-4:
https://lore.kernel.org/r/cover.1792439398.git.vinicius.eduardo.pedrosa@gmail.com
[5] Firmware clocks (separate from CCU v6):
https://lore.kernel.org/r/20261031020640-263f7b05-a7s-clock@gmail.com
[6] Pinctrl voltage-mode fix v3:
https://lore.kernel.org/r/20261109-a733-pinctrl-v3@gmail.com

DTB/schema checks need only [1] 1/8, [2] 3/5, [3] 2/3 and [4] 3/4,
applied in that order before this series. Runtime needs the full CCU,
PMIC and IRQ-bank series, [4] patches 2-4, and [5]-[6]. The clock helpers
listed in v2 are already in v7.4-rc1.

Validation: arm/sunxi.yaml schema check, W=2 CHECK_DTBS=y DTB build
and clean git-am reader test passed. The November 4 DT v2 RAM boot
exercised UART0, PMIC and MMC0 reads on Cubie A7S with vendor firmware
and pinctrl v2; v3 removes a disabled controller and unused pin group.

Untested: boot with pinctrl v3, card writes, hotplug, 1.8 V switching,
other UART/I2C and storage instances, RTC alarms, EL2/ITS/MSI, and
physical BLDO2 voltage.

Enzo Adriano (3):
  dt-bindings: arm: sunxi: document Radxa Cubie A7S
  arm64: dts: allwinner: add A733 SoC description
  arm64: dts: allwinner: add Radxa Cubie A7S board

 .../devicetree/bindings/arm/sunxi.yaml        |   5 +
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../dts/allwinner/sun60i-a733-cubie-a7s.dts   | 284 +++++++++
 .../arm64/boot/dts/allwinner/sun60i-a733.dtsi | 601 ++++++++++++++++++
 4 files changed, 891 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun60i-a733-cubie-a7s.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun60i-a733.dtsi


base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4