From: Werner Nedel Date: Thu, 9 Apr 2009 15:03:35 -0300 Subject: [U-Boot] DBCR0 reset problem in MPC8548CDS Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, I'm trying to update my u-boot version (1.2) to the last one (2009.03). My board is very similar to MPC8548CDS. Everything was working fine till I tried to use the reset command. It hangs the processor in cpu_init_early_f, when it realocates ccsbar. I'd always used the hard reset in DBCR0 register instead HRESET_REQ that ins't wired in my board. I saw that the value of MSR register came different before reset when I compare with the old u-boot (0x8000 -> 0x29200). There are new writes in this register in this new version, could any of them causing my problem? The major difference beetwen my configuration and default resides in u-boot.lds. I changed ADDR(.text) by the fisical init address of my boot flash, that is different of my TEXT_BASE, but bootpg and resetvec still in the same address, so I think that it couldn't be the problem. u-boot.lds: > .bootpg 0xfff80000 + 0x7f000 : < .bootpg ADDR(.text) + 0x7f000 : { cpu/mpc85xx/start.o (.bootpg) } :text = 0xffff > .resetvec 0xfff80000 + 0x7fffc : < .resetvec ADDR(.text) + 0x7fffc : { *(.resetvec) } :text = 0xffff > . = 0xfff80000 + 0x80000; < . = ADDR(.text) + 0x80000; Thanks in advance, Werner Nedel.