From: embed3d@gmail.com (Philipp Rossak) Date: Sat, 10 Feb 2018 23:07:01 +0100 Subject: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators In-Reply-To: <40887d4b-0fb0-239e-e5a9-1a87f82946c2@orpaltech.com> References: <20180209175236.21215-1-embed3d@gmail.com> <160b60e2-6e50-0d63-e6ac-b67e10317e12@orpaltech.com> <40887d4b-0fb0-239e-e5a9-1a87f82946c2@orpaltech.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 10.02.2018 22:08, Sergey Suloev wrote: > On 02/11/2018 12:01 AM, Philipp Rossak wrote: >> Hey Sergey, >> >> Thanks for mentioning, but I think the problem has nothing to do with >> those patches. I tested them with the v4.15.0 Kernel since this is the >> last stable release and we are right now in the merging window. >> >> I tested the latest mainline, without those patches and the kernel is >> not booting (I can't see any uart output). >> >> Thanks, >> Philipp >> >> On 10.02.2018 14:56, Sergey Suloev wrote: >>> On 02/09/2018 08:52 PM, Philipp Rossak wrote: >>>> This patchseries fixes the bananapi m1 devicetree, to be able to >>>> boot again. >>>> The first two patches update/improve the devicetree and the last >>>> patch adds >>>> all missing regulators. >>>> >>>> Regards, >>>> Philipp >>>> >>>> Philipp Rossak (3): >>>> ?? arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes >>>> ?? arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >>>> ?? arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators >>>> >>>> ? arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 >>>> +++++++++++++++++++++++- >>>> ? 1 file changed, 67 insertions(+), 3 deletions(-) >>>> >>> patches are not working >>> >>> Thanks >>> > same problem, but after applying the patches my device is till hanging. > > Can you please share a bootlog? Here is mine [1]. As you can see I'm able to boot. I build it with this branch [2]. For testing you should replace the dtb and the uImage/zImage Philipp [1]: https://pastebin.com/mVjv3LDf [2]: https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-test-2