From: Tudor.Ambarus at microchip.com Date: Tue, 1 Oct 2019 05:23:40 +0000 Subject: [U-Boot] [PATCH v2 3/3] spi-nor: spi-nor-ids: Add USE_FSR flag for mt25qu512a entry In-Reply-To: <20190927044329.21145-4-vigneshr@ti.com> References: <20190927044329.21145-1-vigneshr@ti.com> <20190927044329.21145-4-vigneshr@ti.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 09/27/2019 07:43 AM, Vignesh Raghavendra wrote: > External E-Mail > > > mt25qu512a flash has Flag status register that indicates various errors > that may be encountered during erase/write operations. Therefore add > USE_FSR flag to the entry > n25q256 & 512 support flag status register command. Would you add the flag for them too? mtq256 probably too. > Signed-off-by: Vignesh Raghavendra anyway, looks good: Reviewed-by: Tudor Ambarus > --- > drivers/mtd/spi/spi-nor-ids.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c > index c7b6cf002c54..2e0aebbc44aa 100644 > --- a/drivers/mtd/spi/spi-nor-ids.c > +++ b/drivers/mtd/spi/spi-nor-ids.c > @@ -166,7 +166,8 @@ const struct flash_info spi_nor_ids[] = { > { INFO6("mt25qu256a", 0x20bb19, 0x104400, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, > { INFO("n25q256ax1", 0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, > { INFO6("mt25qu512a", 0x20bb20, 0x104400, 64 * 1024, 1024, > - SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, > + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | > + USE_FSR) }, > { INFO("n25q512a", 0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, > { INFO6("mt25ql512a", 0x20ba20, 0x104400, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, > { INFO("n25q512ax3", 0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, >