From: Patrice CHOTARD Date: Wed, 21 Oct 2020 12:33:55 +0000 Subject: [PATCH 23/33] phy: stm32-usbphyc: migrate trace to dev and log macro In-Reply-To: <20201014091646.4233-24-patrick.delaunay@st.com> References: <20201014091646.4233-1-patrick.delaunay@st.com> <20201014091646.4233-24-patrick.delaunay@st.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Patrick On 10/14/20 11:16 AM, Patrick Delaunay wrote: > Change pr_debug to log_debug or dev_dbg macro and define LOG_CATEGORY. > > Remove the "%s:" __func__ header as it is managed by dev macro > (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). > > Signed-off-by: Patrick Delaunay > --- > > drivers/phy/phy-stm32-usbphyc.c | 18 ++++++++++-------- > 1 file changed, 10 insertions(+), 8 deletions(-) > > diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c > index 9d4296d649..2b69514b3a 100644 > --- a/drivers/phy/phy-stm32-usbphyc.c > +++ b/drivers/phy/phy-stm32-usbphyc.c > @@ -3,6 +3,8 @@ > * Copyright (C) 2018, STMicroelectronics - All Rights Reserved > */ > > +#define LOG_CATEGORY UCLASS_PHY > + > #include > #include > #include > @@ -97,8 +99,8 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) > u32 usbphyc_pll; > > if ((clk_rate < PLL_INFF_MIN_RATE) || (clk_rate > PLL_INFF_MAX_RATE)) { > - pr_debug("%s: input clk freq (%dHz) out of range\n", > - __func__, clk_rate); > + log_debug("input clk freq (%dHz) out of range\n", > + clk_rate); > return -EINVAL; > } > > @@ -115,8 +117,8 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) > > writel(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL); > > - pr_debug("%s: input clk freq=%dHz, ndiv=%d, frac=%d\n", __func__, > - clk_rate, pll_params.ndiv, pll_params.frac); > + log_debug("input clk freq=%dHz, ndiv=%d, frac=%d\n", > + clk_rate, pll_params.ndiv, pll_params.frac); > > return 0; > } > @@ -153,7 +155,7 @@ static int stm32_usbphyc_phy_init(struct phy *phy) > true : false; > int ret; > > - pr_debug("%s phy ID = %lu\n", __func__, phy->id); > + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); > /* Check if one phy port has already configured the pll */ > if (pllen && stm32_usbphyc_is_init(usbphyc)) > goto initialized; > @@ -199,7 +201,7 @@ static int stm32_usbphyc_phy_exit(struct phy *phy) > struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; > int ret; > > - pr_debug("%s phy ID = %lu\n", __func__, phy->id); > + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); > usbphyc_phy->init = false; > > /* Check if other phy port requires pllen */ > @@ -238,7 +240,7 @@ static int stm32_usbphyc_phy_power_on(struct phy *phy) > struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; > int ret; > > - pr_debug("%s phy ID = %lu\n", __func__, phy->id); > + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); > if (usbphyc_phy->vdd) { > ret = regulator_set_enable(usbphyc_phy->vdd, true); > if (ret) > @@ -256,7 +258,7 @@ static int stm32_usbphyc_phy_power_off(struct phy *phy) > struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; > int ret; > > - pr_debug("%s phy ID = %lu\n", __func__, phy->id); > + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); > usbphyc_phy->powered = false; > > if (stm32_usbphyc_is_powered(usbphyc)) Reviewed-by: Patrice Chotard Thanks