From: Dalon L Westergreen Date: Mon, 11 Feb 2019 10:38:59 -0800 Subject: [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM In-Reply-To: References: <20190207212309.27559-1-simon.k.r.goldschmidt@gmail.com> <70af5270f59aee8ed9f9786161ffb5193929cec5.camel@linux.intel.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sat, 2019-02-09 at 11:02 +0100, Marek Vasut wrote: > On 2/8/19 11:51 PM, Dalon L Westergreen wrote: > > On Fri, 2019-02-08 at 21:36 +0100, Simon Goldschmidt wrote: > > > > > > Am Fr., 8. Feb. 2019, 21:28 hat Dalon L Westergreen < > > > dalon.westergreen at linux.intel.com> geschrieben: > > > > On Thu, 2019-02-07 at 22:23 +0100, Simon Goldschmidt wrote: ... > > > > All you need is to have the h2f bridge enabled during the boot. We used to > > do > > this for you if spl found that the FPGA was already configured. On the FPGA > > side, a nios in the ddr controller runs the ddr calibration code. > > This is stratix10 you're talking about, isn't it ? I recall S10 has > nios2 hard block to start up the DRAM, but Gen5 and A10 do not have > that, do they ? > S10 and A10 both have a hard nios for ddr callibration, in cv / av for the soc emif, the A9 performs this functions, but for FPGA only DDR controllers there is a soft nios included in the FPGA ddr RTL that does the ddr callibration. The cv/av code that does this is based on the soft nios core code that performs this function for fpga ddr controllers. --dalon