From: Roger Quadros Date: Mon, 26 Oct 2020 14:47:58 +0200 Subject: [PATCH v2 00/10] net: ti: icssg: Add prueth support In-Reply-To: References: <20200218051004.32524-1-j-keerthy@ti.com> <0daa15ae-4e96-e6ae-25b0-e246d52462fd@ti.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Christian, On 26/10/2020 14:37, Christian Gmeiner wrote: > Hi all > > Is there any update regarding this patch series? I am working on revising this driver. Once ready I will post the updated version upstream. cheers, -roger > > > > Am Do., 20. Feb. 2020 um 10:19 Uhr schrieb Keerthy : >> >> >> >> On 18/02/20 10:39 am, Keerthy wrote: >>> The series adds support for icssg_prueth functionality >>> on u-boot. This series is based on top of master branch. >>> rproc init needs to be done from uboot command prompt. >>> The pru/rtu firmware loading is done by prueth driver soon after >>> config paramters are setup. >> >> A quick update on this series. It seems newer version of this hardware >> needs more modifications to this series. Hence please ignore v2. >> >> Best Regards, >> Keerthy >> >>> >>> Currently only slice0/1 of icssg2 instance on am6-evm >>> is supported. i.e Both slices of icssg2 instance are supported. >>> >>> Prebuilt firmware can be obtained from AM65 procSDK [1] rootfs at /lib/firmware/ti-pruss/am65x*.elf >>> >>> [1] http://software-dl.ti.com/processor-sdk-linux/esd/AM65X/latest/index_FDS.html >>> >>> This tests tftp on prueth. >>> >>> Note: Uboot ethernet driver architecture supports once >>> instance per probe. So only one of the ports are supported >>> per instance. So DT of prueth node should have either ethernet-mii0 >>> or ethernet-mii1. >>> >>> Changes in v2: >>> >>> It has been a while since v1 was posted. Here are the changes: >>> >>> * Removed the usage of misc_init_by_ofnode instead used >>> uclass_get_device_by_ofnode. >>> * Introduced started variable to keep track of the status of the >>> prueth device. >>> * Build Tested on Travis: https://travis-ci.org/Keerthyj/u-boot/builds/651449684 >>> >>> Keerthy (10): >>> net: eth-uclass: eth_get_dev based on SEQ_ALIAS instead of probe order >>> soc: ti: pruss: add a misc driver for PRUSS in TI SoCs >>> remoteproc: pruss: add PRU remoteproc driver >>> net: ti: icssg-prueth: Add ICSSG ethernet driver >>> arm: dts: k3-am65-main: Add msmc_ram node >>> arm: dts: k3-am654-base-board-u-boot: Add icssg specific msmc_ram >>> carveout nodes >>> arm: dts: k3-am65-main: Add scm_conf node >>> arm: dts: k3-am65-main: Add pruss nodes for ICSSG2 >>> arm64: dts: ti: am654-base-board: add ICSSG2 Ethernet support >>> configs: am65x_evm_a53_defconfig: Enable CONFIG_TI_AM64_ICSSG_PRUETH >>> >>> arch/arm/dts/k3-am65-main.dtsi | 191 ++++++ >>> arch/arm/dts/k3-am65.dtsi | 4 +- >>> arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 129 ++++ >>> configs/am65x_evm_a53_defconfig | 3 + >>> drivers/net/ti/Kconfig | 8 + >>> drivers/net/ti/Makefile | 1 + >>> drivers/net/ti/icssg-prueth.c | 652 +++++++++++++++++++ >>> drivers/net/ti/icssg.h | 36 + >>> drivers/net/ti/icssg_classifier.c | 396 +++++++++++ >>> drivers/remoteproc/Kconfig | 11 + >>> drivers/remoteproc/Makefile | 1 + >>> drivers/remoteproc/pru_rproc.c | 405 ++++++++++++ >>> drivers/soc/ti/Kconfig | 12 + >>> drivers/soc/ti/Makefile | 1 + >>> drivers/soc/ti/pruss.c | 152 +++++ >>> include/ti-pruss.h | 17 + >>> net/eth-uclass.c | 12 +- >>> 17 files changed, 2027 insertions(+), 4 deletions(-) >>> create mode 100644 drivers/net/ti/icssg-prueth.c >>> create mode 100644 drivers/net/ti/icssg.h >>> create mode 100644 drivers/net/ti/icssg_classifier.c >>> create mode 100644 drivers/remoteproc/pru_rproc.c >>> create mode 100644 drivers/soc/ti/pruss.c >>> create mode 100644 include/ti-pruss.h >>> > > > -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki