From: Andre Heider Date: Sat, 26 Sep 2020 11:38:31 +0200 Subject: [PATCH] arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell In-Reply-To: <20200925075416.16124-1-pali@kernel.org> References: <20200925075416.16124-1-pali@kernel.org> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 25/09/2020 09:54, Pali Roh?r wrote: > Some Espressobin boards got assigned more than one MAC address. Update > instructions how to correctly store and preserve all MAC addresses. > > Signed-off-by: Pali Roh?r Reviewed-by: Andre Heider > --- > doc/README.marvell | 23 +++++++++++++++++------ > 1 file changed, 17 insertions(+), 6 deletions(-) > > diff --git a/doc/README.marvell b/doc/README.marvell > index 5416bc3035..6fc5ac8a40 100644 > --- a/doc/README.marvell > +++ b/doc/README.marvell > @@ -27,7 +27,7 @@ Build Procedure > - For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig" > - For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig" > - For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig" > - - For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig" > + - For the Armada-3700 EspressoBin use "make mvebu_espressobin-88f3720_defconfig" > > 5. Configure the device-tree and build the U-Boot image: > > @@ -62,11 +62,15 @@ Configuration update > Permanent ethernet MAC address > ------------------------------- > Prior flashing new U-Boot version (as part of ATF image) it is suggested to backup > - permanent ethernet MAC address as it is stored only in U-Boot env storage (SPI or eMMC). > - Some boards like EspressoBin have MAC address printed on sticker. To print current MAC > - address run: > + permanent ethernet MAC addresses as they are stored only in U-Boot env storage (SPI or eMMC). > + Some boards like EspressoBin have MAC addresses printed on sticker. Some boards got assigned > + only one address other may also more than one. To print current MAC addresses run: > > # echo $ethaddr > + # echo $eth1addr > + # echo $eth2addr > + # echo $eth3addr > + # ... > > MAC addresses 00:51:82:11:22:00, 00:51:82:11:22:01, 00:51:82:11:22:02, 00:51:82:11:22:03 > and F0:AD:4E:03:64:7F are default hardcoded values found in Marvell's and Armbian U-Boot > @@ -75,13 +79,20 @@ Permanent ethernet MAC address > suggested to generate new random one. > > After flashing new U-Boot version it is suggested to reset U-Boot env variables to default > - and then set correct permanent ethernet MAC address. > + and then set correct permanent ethernet MAC addresses. > > # env default -a > # setenv ethaddr XX:XX:XX:XX:XX:XX > + # setenv eth1addr XX:XX:XX:XX:XX:XX > + # setenv eth2addr YY:YY:YY:YY:YY:YY > + # setenv eth3addr ZZ:ZZ:ZZ:ZZ:ZZ:ZZ > + # ... > # saveenv > > - Where XX:XX:XX:XX:XX:XX is permanent ethernet MAC address. > + Where value for ethaddr is required permanent ethernet MAC address and values for ethNaddr > + are optional per-port MAC addresses. When optional ethNaddr variables are not defined then > + they are inherited from required ethaddr variable. eth1addr contains MAC address for the > + wan port, other for particular lan ports. > > Recent Linux kernel versions use correct permanent ethernet MAC address from U-Boot env as > U-Boot will inject it into kernel's device-tree. >