From: Ubaldo Porcheddu Date: Mon, 25 Apr 2016 16:10:05 +0100 Subject: [Buildroot] [PATCH 1/1] Preliminary support for Raspberry Pi 3 with symlink In-Reply-To: <87oa8xpx9j.fsf@dell.be.48ers.dk> References: <1461442370-22393-1-git-send-email-ubaldo@eja.it> <871t5triwb.fsf@dell.be.48ers.dk> <81b71ac5323b1793405c3192b6ac5264@eja.it> <20160425161610.4e5cbe87@armant.core.local.os.greenbone.net> <7c641e674768b186ec37e275adbd41da@eja.it> <87oa8xpx9j.fsf@dell.be.48ers.dk> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi, Il 2016-04-25 15:40 Peter Korsgaard ha scritto: >>>>>> "Ubaldo" == Ubaldo Porcheddu writes: > > Hi, > >>>> I just tested the new kernel version but it doesn't give me the >>>> login > >>> prompt, the kernel seems to be booting fine as it can recognize my > >>> keyboard but it doesn't accept any input. > >>> > >> > >> I had something similar, removed the 'console=ttyAMA0...' from the > >> cmdline.txt file, and it booted through. Mine was not able to > recognize > >> my keyboard, but with dropbear and an extra user I was able to > login. > > > after removing the extra console declaration I can also get the > login, > > my keyboard get recognized by the kernel but it doesn't work > properly, > > seems to be adding extra characters after any key press. > > Funky. Removing console=ttyAMA0 (or console=ttyS0) would mean that tty1 > becomes /dev/console, so we end up having two gettys running on tty1 > which could explain the double characters. > > I'm not sure why it doesn't work with console= pointing at the serial > port. Luca, you added the serial console handling, any idea what might > be going wrong? You are right about the double getty, indeed if I set console=tty2 I end up with a working getty/login on tty1 and tty2 and error messages on tty2. Maybe the problem is in /etc/inittab using "console" in place of ttyS0?