From: bugtrack@alsa-project.org Subject: [ALSA - utils 0000527]: snd_pcm_set_rate_near used always Date: Fri, 8 Jul 2005 10:38:29 +0200 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [82.113.61.162]) by alsa.jcu.cz (ALSA's E-mail Delivery System) with ESMTP id 29238C1 for ; Fri, 8 Jul 2005 10:38:29 +0200 (MEST) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org The following issue has been CLOSED ====================================================================== ====================================================================== Reported By: AKennedy Assigned To: ====================================================================== Project: ALSA - utils Issue ID: 527 Category: aplay/arecord Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 09-23-2004 21:43 CEST Last Modified: 07-08-2005 10:38 CEST ====================================================================== Summary: snd_pcm_set_rate_near used always Description: When selecting to record using a speific device, say hw1,0, this craps out. . . using plughw1,0 or default works, however. Should this have an if statement to control if the device selected is hw/can you _near if the device is NOT default or plughw? ====================================================================== ---------------------------------------------------------------------- jdthood - 03-20-05 15:47 ---------------------------------------------------------------------- > When selecting to record using a speific device, say hw1,0, this > craps out. . . using plughw1,0 or default works, however. Should > this have an if statement to control if the device selected is > hw/can you _near if the device is NOT default or plughw? Can you please try to explain more clearly what you mean? ---------------------------------------------------------------------- tiwai - 03-23-05 12:51 ---------------------------------------------------------------------- You'll see a warning message if the given rate can't be used (at least with the latest version). Issue History Date Modified Username Field Change ====================================================================== 09-23-04 21:43 AKennedy New Issue 09-29-04 05:37 AKennedy Issue Monitored: AKennedy 09-29-04 05:37 AKennedy Issue End Monitor: AKennedy 03-20-05 15:47 jdthood Note Added: 0004094 03-23-05 12:51 tiwai Note Added: 0004154 03-31-05 20:22 jdthood Status new => resolved 03-31-05 20:22 jdthood Resolution open => fixed 07-08-05 10:38 perex Status resolved => closed ====================================================================== ------------------------------------------------------- This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar