Return-Path: Authentication-Results: lists.ozlabs.org; spf=pass (mailfrom) smtp.mailfrom=aj.id.au (client-ip=66.111.4.26; helo=out2-smtp.messagingengine.com; envelope-from=andrew@aj.id.au; receiver=) Authentication-Results: lists.ozlabs.org; dmarc=none (p=none dis=none) header.from=aj.id.au Authentication-Results: lists.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=aj.id.au header.i=@aj.id.au header.b="KUcEag8A"; dkim=pass (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="WU8ni1dz"; dkim-atps=neutral Received: from out2-smtp.messagingengine.com (out2-smtp.messagingengine.com [66.111.4.26]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 46P56z6nNBzDqjy for ; Thu, 5 Sep 2019 13:01:15 +1000 (AEST) Received: from compute4.internal (compute4.nyi.internal [10.202.2.44]) by mailout.nyi.internal (Postfix) with ESMTP id 9850920A82 for ; Wed, 4 Sep 2019 23:01:11 -0400 (EDT) Received: from imap2 ([10.202.2.52]) by compute4.internal (MEProxy); Wed, 04 Sep 2019 23:01:11 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=aj.id.au; h= mime-version:message-id:in-reply-to:references:date:from:to :subject:content-type; s=fm3; bh=PaA/M8SqadNq3gpki6b8l4EnmuMOCgw BidGH0CBuOSc=; b=KUcEag8AjPsXAI+vliqTyMg5Ja7wEb2V2B1TVQUWiT1DoJx nDxwWYtOoBOXxIlcijVJNiYu7h2XThj+eDSYoCHNK9JV/V3ENR+lJaMSc7wDJkYx 9Q4viLe0+aPsPhU+LR+RyPFs0hpu6P0N/BG1JhhInQzRcPPwG/CH3pmJhL3ix8VS UD277b64aIjEk6I/4OyTJwcdxaLpK7qoxwOX6zplQP6UU+2uyNKbXAXa3GpXoAuh NyQjpAcY5f0wG7swwRezDwE/jVe2gFC2I9akhzPnmEPX4wJ+UlG6otOhNXfNP4rC ebgDM7id1lCH5vV/61gpc0QMwg5C/VOTcRd1HiQ== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm3; bh=PaA/M8 SqadNq3gpki6b8l4EnmuMOCgwBidGH0CBuOSc=; b=WU8ni1dzKEig9cdloFD/Kv 14zaWd4vXVMzrQtqa9kSnGpVT5Pjoje90IDonypFTnlTUVBE7bwf+CWowpSpcCB2 ckhRVnY/P6Q/XSUw6ZfGOv/k0wEtXSd7ZFqp65AQ1F8KrsU072jeXmlGJaw6NNi2 0J73W8DiAQKug8+4IUcGkJbO1yE85IloD1EP79Ygfmu98wOlPuHSRUzytTGiHX5J BAzsZXiXED4mY2V+vFT4N5abp+m5VnulP3m8OLS4vcUUElAS2bKYlbh/sftvjkaG rgG9bI7Vo2/kXdlK7g7OPj7Z6MsPqw/WxHSKtwhHRqidJi+HfEVbar8BZ3YiacUw == X-ME-Sender: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgeduvddrudejiedgieefucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucenucfjughrpefofgggkfgjfhffhffvufgtsehttd ertderreejnecuhfhrohhmpedftehnughrvgifucflvghffhgvrhihfdcuoegrnhgurhgv fiesrghjrdhiugdrrghuqeenucfrrghrrghmpehmrghilhhfrhhomheprghnughrvgifse grjhdrihgurdgruhenucevlhhushhtvghrufhiiigvpedt X-ME-Proxy: Received: by mailuser.nyi.internal (Postfix, from userid 501) id DFBE7E00A3; Wed, 4 Sep 2019 23:01:10 -0400 (EDT) X-Mailer: MessagingEngine.com Webmail Interface User-Agent: Cyrus-JMAP/3.1.7-186-gf4cb3c3-fmstable-20190904v1 Mime-Version: 1.0 Message-Id: In-Reply-To: <1567629311-7553-1-git-send-email-eajames@linux.ibm.com> References: <1567629311-7553-1-git-send-email-eajames@linux.ibm.com> Date: Thu, 05 Sep 2019 12:31:36 +0930 From: "Andrew Jeffery" To: openbmc@lists.ozlabs.org Subject: =?UTF-8?Q?Re:_[PATCH_linux_dev-5.2_1/2]_ARM:_dts:_Aspeed:_Add_I2C_busses?= =?UTF-8?Q?_to_AST2600_and_Tacoma?= Content-Type: text/plain X-BeenThere: openbmc@lists.ozlabs.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Development list for OpenBMC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Sep 2019 03:01:20 -0000 On Thu, 5 Sep 2019, at 06:05, Eddie James wrote: > Add all the I2C busses to the AST2600 dtsi. Set the busses status to > "okay" and add all the devices present on the Tacoma card to the > busses. > > Signed-off-by: Eddie James > --- > arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 384 ++++++++++++++++++++++++++++ > arch/arm/boot/dts/aspeed-g6.dtsi | 272 ++++++++++++++++++++ Bit of a nit, but can you please split the dtsi change from the tacoma change? > 2 files changed, 656 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts > b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts > index 0a38bc0..408af00 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts > @@ -3,6 +3,7 @@ > /dts-v1/; > > #include "aspeed-g6.dtsi" > +#include > > / { > model = "Tacoma"; > @@ -37,3 +38,386 @@ > &fsim0 { > status = "okay"; > }; > + > +&i2c0 { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > +}; > + > +&i2c2 { > + status = "okay"; > +}; > + > +&i2c3 { > + status = "okay"; > + > + bmp: bmp280@77 { > + compatible = "bosch,bmp280"; > + reg = <0x77>; > + #io-channel-cells = <1>; > + }; > + > + max31785@52 { > + compatible = "maxim,max31785a"; > + reg = <0x52>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + fan@0 { > + compatible = "pmbus-fan"; > + reg = <0>; > + tach-pulses = <2>; > + maxim,fan-rotor-input = "tach"; > + maxim,fan-pwm-freq = <25000>; > + maxim,fan-dual-tach; > + maxim,fan-no-watchdog; > + maxim,fan-no-fault-ramp; > + maxim,fan-ramp = <2>; > + maxim,fan-fault-pin-mon; > + }; > + > + fan@1 { > + compatible = "pmbus-fan"; > + reg = <1>; > + tach-pulses = <2>; > + maxim,fan-rotor-input = "tach"; > + maxim,fan-pwm-freq = <25000>; > + maxim,fan-dual-tach; > + maxim,fan-no-watchdog; > + maxim,fan-no-fault-ramp; > + maxim,fan-ramp = <2>; > + maxim,fan-fault-pin-mon; > + }; > + > + fan@2 { > + compatible = "pmbus-fan"; > + reg = <2>; > + tach-pulses = <2>; > + maxim,fan-rotor-input = "tach"; > + maxim,fan-pwm-freq = <25000>; > + maxim,fan-dual-tach; > + maxim,fan-no-watchdog; > + maxim,fan-no-fault-ramp; > + maxim,fan-ramp = <2>; > + maxim,fan-fault-pin-mon; > + }; > + > + fan@3 { > + compatible = "pmbus-fan"; > + reg = <3>; > + tach-pulses = <2>; > + maxim,fan-rotor-input = "tach"; > + maxim,fan-pwm-freq = <25000>; > + maxim,fan-dual-tach; > + maxim,fan-no-watchdog; > + maxim,fan-no-fault-ramp; > + maxim,fan-ramp = <2>; > + maxim,fan-fault-pin-mon; > + }; > + }; > + > + dps: dps310@76 { > + compatible = "infineon,dps310"; > + reg = <0x76>; > + #io-channel-cells = <0>; > + }; > + > + pca0: pca9552@60 { > + compatible = "nxp,pca9552"; > + reg = <0x60>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio@0 { > + reg = <0>; > + type = ; > + }; > + > + gpio@1 { > + reg = <1>; > + type = ; > + }; > + > + gpio@2 { > + reg = <2>; > + type = ; > + }; > + > + gpio@3 { > + reg = <3>; > + type = ; > + }; > + > + gpio@4 { > + reg = <4>; > + type = ; > + }; > + > + gpio@5 { > + reg = <5>; > + type = ; > + }; > + > + gpio@6 { > + reg = <6>; > + type = ; > + }; > + > + gpio@7 { > + reg = <7>; > + type = ; > + }; > + > + gpio@8 { > + reg = <8>; > + type = ; > + }; > + > + gpio@9 { > + reg = <9>; > + type = ; > + }; > + > + gpio@10 { > + reg = <10>; > + type = ; > + }; > + > + gpio@11 { > + reg = <11>; > + type = ; > + }; > + > + gpio@12 { > + reg = <12>; > + type = ; > + }; > + > + gpio@13 { > + reg = <13>; > + type = ; > + }; > + > + gpio@14 { > + reg = <14>; > + type = ; > + }; > + > + gpio@15 { > + reg = <15>; > + type = ; > + }; > + }; > + > + power-supply@68 { > + compatible = "ibm,cffps1"; > + reg = <0x68>; > + }; > + > + power-supply@69 { > + compatible = "ibm,cffps1"; > + reg = <0x69>; > + }; > +}; > + > +&i2c4 { > + status = "okay"; > + > + tmp423a@4c { > + compatible = "ti,tmp423"; > + reg = <0x4c>; > + }; > + > + ir35221@70 { > + compatible = "infineon,ir35221"; > + reg = <0x70>; > + }; > + > + ir35221@71 { > + compatible = "infineon,ir35221"; > + reg = <0x71>; > + }; > +}; > + > +&i2c5 { > + status = "okay"; > + > + tmp423a@4c { > + compatible = "ti,tmp423"; > + reg = <0x4c>; > + }; > + > + ir35221@70 { > + compatible = "infineon,ir35221"; > + reg = <0x70>; > + }; > + > + ir35221@71 { > + compatible = "infineon,ir35221"; > + reg = <0x71>; > + }; > +}; > + > +&i2c6 { > + status = "okay"; > +}; > + > +&i2c7 { > + status = "okay"; > +}; > + > +&i2c8 { > + status = "okay"; > +}; > + > +&i2c9 { > + status = "okay"; > + > + tmp275@4a { > + compatible = "ti,tmp275"; > + reg = <0x4a>; > + }; > +}; > + > +&i2c10 { > + status = "okay"; > +}; > + > +&i2c11 { > + status = "okay"; > + > + pca9552: pca9552@60 { > + compatible = "nxp,pca9552"; > + reg = <0x60>; > + #address-cells = <1>; > + #size-cells = <0>; > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", > + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", > + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", > + "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF", > + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", > + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", > + "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF", > + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; > + > + gpio@0 { > + reg = <0>; > + type = ; > + }; > + > + gpio@1 { > + reg = <1>; > + type = ; > + }; > + > + gpio@2 { > + reg = <2>; > + type = ; > + }; > + > + gpio@3 { > + reg = <3>; > + type = ; > + }; > + > + gpio@4 { > + reg = <4>; > + type = ; > + }; > + > + gpio@5 { > + reg = <5>; > + type = ; > + }; > + > + gpio@6 { > + reg = <6>; > + type = ; > + }; > + > + gpio@7 { > + reg = <7>; > + type = ; > + }; > + > + gpio@8 { > + reg = <8>; > + type = ; > + }; > + > + gpio@9 { > + reg = <9>; > + type = ; > + }; > + > + gpio@10 { > + reg = <10>; > + type = ; > + }; > + > + gpio@11 { > + reg = <11>; > + type = ; > + }; > + > + gpio@12 { > + reg = <12>; > + type = ; > + }; > + > + gpio@13 { > + reg = <13>; > + type = ; > + }; > + > + gpio@14 { > + reg = <14>; > + type = ; > + }; > + > + gpio@15 { > + reg = <15>; > + type = ; > + }; > + }; > + > + rtc@32 { > + compatible = "epson,rx8900"; > + reg = <0x32>; > + }; > + > + eeprom@51 { > + compatible = "atmel,24c64"; > + reg = <0x51>; > + }; > + > + ucd90160@64 { > + compatible = "ti,ucd90160"; > + reg = <0x64>; > + }; > +}; > + > +&i2c12 { > + status = "okay"; > +}; > + > +&i2c13 { > + status = "okay"; > +}; > + > +&i2c14 { > + status = "okay"; > +}; > + > +&i2c15 { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi > index 12569e5..0a8e08a 100644 > --- a/arch/arm/boot/dts/aspeed-g6.dtsi > +++ b/arch/arm/boot/dts/aspeed-g6.dtsi > @@ -12,6 +12,22 @@ > interrupt-parent = <&gic>; > > aliases { > + i2c0 = &i2c0; > + i2c1 = &i2c1; > + i2c2 = &i2c2; > + i2c3 = &i2c3; > + i2c4 = &i2c4; > + i2c5 = &i2c5; > + i2c6 = &i2c6; > + i2c7 = &i2c7; > + i2c8 = &i2c8; > + i2c9 = &i2c9; > + i2c10 = &i2c10; > + i2c11 = &i2c11; > + i2c12 = &i2c12; > + i2c13 = &i2c13; > + i2c14 = &i2c14; > + i2c15 = &i2c15; > serial4 = &uart5; > }; > > @@ -255,6 +271,262 @@ > }; > }; > > + i2c0: i2c-bus@1e78a80 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a080 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1_default>; > + status = "disabled"; > + }; > + > + i2c1: i2c-bus@1e78a100 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a100 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2_default>; > + status = "disabled"; > + }; > + > + i2c2: i2c-bus@1e78a180 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a180 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3_default>; > + status = "disabled"; > + }; > + > + i2c3: i2c-bus@1e78a200 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a200 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c4_default>; > + status = "disabled"; > + }; > + > + i2c4: i2c-bus@1e78a280 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a280 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c5_default>; > + status = "disabled"; > + }; > + > + i2c5: i2c-bus@1e78a300 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a300 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c6_default>; > + status = "disabled"; > + }; > + > + i2c6: i2c-bus@380 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a380 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c7_default>; > + status = "disabled"; > + }; > + > + i2c7: i2c-bus@1e78a400 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a400 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c8_default>; > + status = "disabled"; > + }; > + > + i2c8: i2c-bus@1e78a480 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a480 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c9_default>; > + status = "disabled"; > + }; > + > + i2c9: i2c-bus@1e78a500 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a500 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c10_default>; > + status = "disabled"; > + }; > + > + i2c10: i2c-bus@1e78a580 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a580 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c11_default>; > + status = "disabled"; > + }; > + > + i2c11: i2c-bus@1e78a600 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a600 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c12_default>; > + status = "disabled"; > + }; > + > + i2c12: i2c-bus@1e78a680 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a680 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c13_default>; > + status = "disabled"; > + }; > + > + i2c13: i2c-bus@1e78a700 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a700 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c14_default>; > + status = "disabled"; > + }; > + > + i2c14: i2c-bus@1e78a780 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a780 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c15_default>; > + status = "disabled"; > + }; > + > + i2c15: i2c-bus@1e78a800 { > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + reg = <0x1e78a800 0x80>; > + compatible = "aspeed,ast2600-i2c-bus"; > + clocks = <&syscon ASPEED_CLK_APB1>; > + resets = <&syscon ASPEED_RESET_I2C>; > + bus-frequency = <100000>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c16_default>; > + status = "disabled"; > + }; > + > fsim0: fsi@1e79b000 { > compatible = "aspeed,ast2600-fsi-master", "fsi-master"; > reg = <0x1e79b000 0x94>; > -- > 1.8.3.1 > >