From: Lukas Haase Subject: Bind mount on indirect mount OR script for direct mount Date: Fri, 31 Jul 2009 00:40:36 +0200 Message-ID: Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: autofs-bounces@linux.kernel.org Errors-To: autofs-bounces@linux.kernel.org Content-Type: text/plain; charset="us-ascii"; format="flowed" To: autofs@linux.kernel.org Hi, I have the following problem: I have an external media USB drive which I want to automatically power on and mount it into a virtual environment (OpenVZ). Something similar like to mounting into chroot. On the host, the drive should be mounted to /var/lib/vz/root/500/media/media which correspondents /media/media inside the virtual OpenVZ container. The USB drive is connected to a powerhub which can be switched from a script. The drive should only be switched on when it is needed and switched off again afterwards. As a solution I would have the following ideas (both are not yet working :-( ): 1.) Defining a direct mount: # cat /etc/auto.master /- auto.misc --timeout=5 # cat /etc/auto.misc /var/lib/vz/root/500/media/media -fstype=vfat,defaults :/dev/media But I see no way here to execute a script in order to power on the drive. Is there a way? 2.) By using indirect mounts I can use a script. But unfortunately I do *not* want to have an indirect mount inside the VE. So my idea would be to first mount the drive indirectly to /media/auto/*: # cat /etc/auto.master /media/auto /usr/local/sbin/autofs-mount.sh --timeout=5 --ghost The script powers on the drive, waits until the device node exists and returns the options. This works quite good. But now I want the content to appear in /var/lib/vz/root/500/media/media. Normally I would just take a symlink and everything would be fine. But due to the nature of the OpenVZ container ("chroot") I rather need a bind mount. So I tried: # cat /etc/auto.master /- auto.misc --timeout=5 # cat /etc/auto.misch /var/lib/vz/root/500/media/media -fstype=none,bind :/media/auto/media But unfortunately this does not seem to work: # ls -la /media/auto/media/ (directory content - works) # ls -la /var/lib/vz/root/500/media/media/ ls: cannot open directory /var/lib/vz/root/500/media/media/: No such file or directory And this is the debug output: [...] lookup_mount: lookup(file): looking up /var/lib/vz/root/500/media/media lookup_mount: lookup(file): /var/lib/vz/root/500/media/media -> -fstype=none,bind :/media/auto/media parse_mount: parse(sun): expanded entry: -fstype=none,bind :/media/auto/media parse_mount: parse(sun): gathered options: fstype=none,bind parse_mount: parse(sun): dequote(":/media/auto/media") -> :/media/auto/media parse_mount: parse(sun): core of entry: options=fstype=none,bind, loc=:/media/auto/media sun_mount: parse(sun): mounting root /-, mountpoint /var/lib/vz/root/500/media/media, what /media/auto/media, fstype none, options bind do_mount: /media/auto/media /var/lib/vz/root/500/media/media type none options bind using module generic mount_mount: mount(generic): calling mkdir_path /var/lib/vz/root/500/media/media mount_mount: mount(generic): warning: /var/lib/vz/root/500/media/media is already mounted send_ready: token = 174 mounted /var/lib/vz/root/500/media/media [...] Is there any way to solve my problem? I have Debian lenny with the autofs5 package. Thank you very much. Best regards, Luke