From: Ricky Cheng Subject: Re: [info] Silicon Image device hotplug debounce Date: Mon, 1 Aug 2005 04:23:34 +0000 (UTC) Message-ID: References: <42E672C1.4000502@pobox.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from main.gmane.org ([80.91.229.2]:41430 "EHLO ciao.gmane.org") by vger.kernel.org with ESMTP id S261527AbVHAFki (ORCPT ); Mon, 1 Aug 2005 01:40:38 -0400 Received: from root by ciao.gmane.org with local (Exim 4.43) id 1DzT2Q-0004fM-1f for linux-ide@vger.kernel.org; Mon, 01 Aug 2005 07:40:34 +0200 Received: from mail.qnap.com.tw ([mail.qnap.com.tw]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 01 Aug 2005 07:40:34 +0200 Received: from rickycheng by mail.qnap.com.tw with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 01 Aug 2005 07:40:34 +0200 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Jeff Garzik pobox.com> writes: > > > This is some info that Silicon Image provided, for use in developing > SATA hotplug. This info is public and not NDA as of the publishing of > the SiI 311x hardware documentation at > > http://gkernel.sourceforge.net/specs/sii/ > > Kudos again to SiI for opening their 311x and CMD680 [PATA] docs. > > Jeff > > > > > Here are some writeups for our 3112/3152 hot plug/unplug handling. Hope it will > help in your open source development. > > For the 3114 controller, the sequence is essentially the same as the 3112 except > that the PHYRDY change handler does not need to reset the channel and of course > obvious changes to handle the two additional channels of the 3114. > > Best regards, > [silicon image person] > Hi, This is Ricky. I am finding solution of sil 3512 chip hotswap problem. I think this doc can help some. But I don't really understand libata very much. Can someone help some ideas?..Thanks I know I should do something in interrupt handler in libata.c like check status of plug/unplug. Is is right?