From: Saikrishna Gajula <gajula_kittu@rediffmail.com>
Date: Fri, 14 Oct 2005 10:07:44 +0000 (UTC)
Subject: [U-Boot-Users] Re: Error: start address not on sector boundary
References: <7febb0a1050706134762dfe45e@mail.gmail.com> <20050706222653.04E103535EB@atlas.denx.de>
Message-ID: <loom.20051014T120117-702@post.gmane.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Wolfgang Denk <wd <at> denx.de> writes:

> 
> In message <7febb0a1050706134762dfe45e <at> mail.gmail.com> you wrote:
> >
> > I complie new u-boot for Flash SST39VF3201.
> > It complete and can boot with u-boot.
> > Follow that.
> > boot 1.0 (Nov 25 2003 - 23:08:05)
> > 
> > Uncompressing image...
> > U-Boot 1.1.2 (Jun 25 2005 - 22:30:04)
> 
> And which board is this exactly, and which  board  configuration  did
> you use?
> 
> > U-Boot> saveenv
> > Saving Environment to Flash...
> > Error: start address not on sector boundary
> > 
> > and Flash Organizations follow this code.
> > 
> > OrgDef OrgSST39VF3201[] =
> > {
> > 	{  1,16*1024 },	/*   1 *  16 kBytes sectors */
> > 	{  2,8*1024 },	/*   2 * 8 kBytes sectors */
> > 	{  1,32*1024 },	/*   1 * 32 kBytes sectors */
> > 	{ 63,64*1024 },	/*  31 * 64 kBytes sectors */
> > };
> > 
> > Why it show error.?


> 
> Because your flash driver was misconfigured.
> 
> > How to resolve this error.?
> 
> Fix your flash driver configuration.
> 
> [I cannot give any better help without even knowing which  board  you
> are talking about.]
> 
> Best regards,
> 
> Wolfgang Denk
> 


Hi,

I am also getting the same error like below, but i dont know why it is coming!

i am using Versatile PB by ARM and i am using U-boot-1.1.3, and i am using the
flash of size 64M

Versatile # saveenv
Saving Environment to Flash...
Error: start address not on sector boundary

can any body give a hint to solve this problem,

Thanks in advance,
Saikrishna Gajula