From: Gregg Nemas Date: Wed, 16 Nov 2005 17:44:42 +0000 (UTC) Subject: [U-Boot-Users] U-boot IDE working, what now? Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de I have a PCP 440GP-based custom CPU board with a Compact Flash connected directly to the 440GP peripheral bus. There is no PCMCIA controller or PCI bus in this setup. The IDE registers simply appear at a fixed physical address I have chosen. This is the so-called "True IDE mode". I have gotten the u-boot IDE/ATA code working with this setup. I can see the partitions and I list files using ext2ls. I was able to boot a linux kernel using both the diskboot method and the loadext2 method. This is all working great. Now I need to make linux aware of this device so it can mount its root file system from it, and I am not sure where to start. I have looked at both http://www.denx.de/wiki/view/DULG/ ConfigureLinuxForPCMCIACardsWithoutTheCardServicesPackage and http://www.denx.de/wiki/view/DULG/KernelConfigurationForPCMCIA but I am not sure if these apply to my setup. Building the first one results in an undefined symbol IMAP_ADDR, which I see is the address of an IMMR register which the 440GP does not have. I have not tried the second one, but it looks like it requires a PCMCIA controller, and the ability to enumerate devices using a configuration space type of mechanism, which is not present on my board. Can anyone offer some guidance? Thanks. Gregg