From: sgobien Date: Wed, 7 Feb 2007 19:09:15 +0000 (UTC) Subject: [U-Boot-Users] MMC Card Problems with U-Boot 1.1.6 Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello. I?m using U-Boot 1.1.6, and I?m having problems with the MMC support. My board is a custom board based on the PXA270 CPU, with 128MB of SDRAM and 64MB of internal flash. Using the loadb command, I can successfully copy my filesystem to the SDRAM. Then, I use the cp.b command to transfer it to flash. Everything works properly and the filesystem transfers without any problem. Next, I tried using the fatload command to copy the same exact filesystem from the MMC card to SDRAM. U-Boot claims that the entire file was copied correctly as indicated by the filesize environment variable. However, once I move the filesystem to flash, it ends up corrupted in the flash. I can only conclude that the fatload command has incorrectly copied the filesystem from the MMC card to SDRAM. Has anybody had trouble using MMC cards and the fat commands with a PXA270 CPU? I don?t receive any error messages, so I?m not really sure where to look. Thanks in advance for any guidance. Steve