From: Adarsh Babu Date: Tue, 13 Feb 2007 16:37:21 +0000 (UTC) Subject: [U-Boot-Users] MCF5271 Port. References: <20070208162003.A303035342C@atlas.denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Wolfgang Denk denx.de> writes: > > In message post.gmane.org> you wrote: > > > > to develop files for the custom board. There isn't a "flash.c" for the > > M5271evb in "board/m5271evb". So does the m5271evb port use the "flash.c" > > present in the common folder ? > > No, it uses the CFI flash driver as all boards with CFI conformant > flash devices should do. > > Best regards, > > Wolfgang Denk > Hi, I created files for the custom board with M5271EVB as the example. I modified the dram init to support the SDRAM we have on the board. I also made changes to the flash base address and the associated to gel with our memory map. when I flashed the u-boot.bin file that I got, the following turned up on the console. U-Boot 1.2.0 (Feb 13 2007 - 20:15:12) CPU: Freescale Coldfire MCF5271 at 100 MHz Board: Freescale M5271EVB DRAM: 16 MB FLASH: The board hung after "FLASH:". The flash on our board is SST39VF6401. From the Flash.h file I learn that SSTxF6401 has been considered and cfi_driver.c will check the CFI conformant device. Can you please suggest the possible areas that I should check or have neglected. Regards, Adarsh.