From: Andrew Klossner Date: Fri, 23 Feb 2007 21:57:12 +0000 (UTC) Subject: [U-Boot-Users] rtc/ds1374.c turns clock OFF when it means to turn it ON Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de rtc/ds1374.c mistakes the "don't enable the oscillator" bit for a "do enable the oscillator bit" and sets it to 1, stopping the clock. My guess is that nobody has actually used rtc_set or rtc_reset with this driver. We've been using this chip for a few years with a proprietary OS and are now switching to u-boot and Linux. I revised the u-boot driver based on our stable driver. Besides fixing the oscillator bit, I set it up to read all the registers with a single IIC transaction for efficiency and to see any error code from the IIC subsystem. I would attach the new driver here but I can't figure out how. I'm typing through a broken "hello new user, we don't yet trust you" web page. If somebody could send instructions to andrew at cesa.opbu.xerox.com, I'd like to submit this revision. Andrew Klossner