Return-path: Received: from lo.gmane.org ([80.91.229.12]:43117 "EHLO lo.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753348Ab1CJQAK (ORCPT ); Thu, 10 Mar 2011 11:00:10 -0500 Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1PxiHW-0005Pb-2E for linux-media@vger.kernel.org; Thu, 10 Mar 2011 17:00:06 +0100 Received: from 79-133-11-156.bredband.aland.net ([79.133.11.156]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 10 Mar 2011 17:00:06 +0100 Received: from dennis.kurten by 79-133-11-156.bredband.aland.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 10 Mar 2011 17:00:06 +0100 To: linux-media@vger.kernel.org From: Dennis Kurten Subject: Re: Well supported USB DVB-C device? Date: Thu, 10 Mar 2011 15:46:51 +0000 (UTC) Message-ID: References: <201102280102.17852.malte.gell@gmx.de> <4D6AEC35.8000202@iki.fi> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit List-ID: Sender: Antti Palosaari iki.fi> writes: > > Anysee E30 C Plus is supported as far as I know. > > Note that new revision of Anysee E30 Combo Plus is no longer supported > since they changed to new NXP silicon tuner. E30 Combo Plus and E30 C > Plus are different devices. > I might have some useful info on this, since I bought a recent Anysee E30 C earlier this week. The unit does not seem to work out of the box (tested on three different kernels (2.6.32, 2.6.33 & 2.6.35). It registers as having a TDA10023 frontend and also loads modules for zl10353 and mt352. Tuning fails however and the device info indicates rev1.0 which means something might have changed. The funny thing is that in windows it shows up as a DVB-C/T device and you can tune to both cable and terrestrial!! Could this mean that it is actually the same hardware as a Combo? I tried to check with a distributor and got a message that new devices could have the following components: DNOD44CDV086A, TDA18212. I plan to return the unit unless somebody knows if there's any hope of getting it to work with existing drivers.