From: Wolfgang Subject: Re: backporting can & can-j1939 Date: Wed, 14 Dec 2011 18:19:45 +0000 (UTC) Message-ID: References: <20111209150133.GA1470@e-circ.dyndns.org> <20111212081217.GA351@e-circ.dyndns.org> <20111212124031.GD351@e-circ.dyndns.org> <20111213095312.GC430@e-circ.dyndns.org> <20111213155110.GA314@e-circ.dyndns.org> <20111214154351.GB6112@e-circ.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from lo.gmane.org ([80.91.229.12]:33138 "EHLO lo.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755373Ab1LNSUD (ORCPT ); Wed, 14 Dec 2011 13:20:03 -0500 Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1RatQv-0008Vo-L7 for linux-can@vger.kernel.org; Wed, 14 Dec 2011 19:20:01 +0100 Received: from p549CA325.dip.t-dialin.net ([84.156.163.37]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Wed, 14 Dec 2011 19:20:01 +0100 Received: from wutz by p549CA325.dip.t-dialin.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Wed, 14 Dec 2011 19:20:01 +0100 Sender: linux-can-owner@vger.kernel.org List-ID: To: linux-can@vger.kernel.org > Hold here: Your 2.6.31 is too old for this feature. > You must do : $ echo can0 > /proc/net/can-j1939/net > as a legacy measure. > > You will be able to use $ip for adding/removing addressing info. Ok, I will try that. > > Error: either "dev" is duplicate, or "j1939" is a garbage. > > This makes me think you have the original 'stock' iproute2, and not > the iproute2-j1939 one (but I'm not sure yet today). Yes, you are right I was using the 'stock' iproute2, should I replace the stock with the j1939 iproute2, before compiling the kernel? I think I understood that wrong. Do I have to replace the can-utils as well; I am still not complete aware how the respitories differ from each other --Wolfgang