From: Wolfgang Subject: Re: replacing iproute2 & can-utils with j1939 variants Date: Thu, 15 Dec 2011 13:43:30 +0000 (UTC) Message-ID: References: <20111213095312.GC430@e-circ.dyndns.org> <20111213155110.GA314@e-circ.dyndns.org> <20111214154351.GB6112@e-circ.dyndns.org> <20111214204237.GC306@e-circ.dyndns.org> <20111215092018.GB321@e-circ.dyndns.org> <20111215120434.GD321@e-circ.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from lo.gmane.org ([80.91.229.12]:45642 "EHLO lo.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751447Ab1LONnq (ORCPT ); Thu, 15 Dec 2011 08:43:46 -0500 Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1RbBb7-0000fw-4r for linux-can@vger.kernel.org; Thu, 15 Dec 2011 14:43:45 +0100 Received: from fire.makon-engineering.de ([80.152.230.22]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 15 Dec 2011 14:43:45 +0100 Received: from wutz by fire.makon-engineering.de with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 15 Dec 2011 14:43:45 +0100 Sender: linux-can-owner@vger.kernel.org List-ID: To: linux-can@vger.kernel.org I copied all things as you told me, I think/hope the hardest part is over now. Thank you!! What do I have to do afterwards I did $ echo can0 /proc/net/can-j1939/net because if I do '$ifconfig can0 up' it responses with mpc52xx_can 80001300.mscan: bit-timing not yet defined ifconfig: SIOCSIFFLAGS: Invalid argument (Just for information this time different answer: $ ip link set can0 j1939 on RTNETLINK answers: Invalid argument ) Is there any documentation or is it possible to use cangw with API? --Wolfgang