From: Wolfgang Subject: Re: recv list Date: Fri, 6 Jan 2012 18:25:59 +0000 (UTC) Message-ID: References: <20111221155314.GC12050@e-circ.dyndns.org> <20111223110445.GB12091@e-circ.dyndns.org> <20120104094715.GB320@e-circ.dyndns.org> <20120104204151.GA306@e-circ.dyndns.org> <20120105120930.GA372@e-circ.dyndns.org> <20120106122550.GA17043@e-circ.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from lo.gmane.org ([80.91.229.12]:43293 "EHLO lo.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758961Ab2AFS0Q (ORCPT ); Fri, 6 Jan 2012 13:26:16 -0500 Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1RjEUY-00007H-Nc for linux-can@vger.kernel.org; Fri, 06 Jan 2012 19:26:14 +0100 Received: from p549CCB01.dip.t-dialin.net ([84.156.203.1]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Fri, 06 Jan 2012 19:26:14 +0100 Received: from wutz by p549CCB01.dip.t-dialin.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Fri, 06 Jan 2012 19:26:14 +0100 Sender: linux-can-owner@vger.kernel.org List-ID: To: linux-can@vger.kernel.org > tried 'jspy' yet? It is not possible because at the moment I am working with a simulation tool, to get out how things are working, is this a problem? Now I have a different question, is it possible to bind different sockets with different src.addr to one interface. Because it is saying 'bind failed: Device or resource busy' if I want to do this ('$ip addr add j1939 0x01 dev can0' is working, of course) Or do I have to do this with recvmsg()? Because as you know I want keep the various src address'. Kind regards, Wolfgang