From: ziv haziz Subject: adding an external dsp under soc-dsp framework Date: Mon, 6 Aug 2012 12:53:40 +0000 (UTC) Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from plane.gmane.org (plane.gmane.org [80.91.229.3]) by alsa0.perex.cz (Postfix) with ESMTP id DBE2D265217 for ; Mon, 6 Aug 2012 14:24:06 +0200 (CEST) Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1SyMog-0001M1-V5 for alsa-devel@alsa-project.org; Mon, 06 Aug 2012 14:53:51 +0200 Received: from proxy56.messagelabs.net ([85.158.138.25]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 06 Aug 2012 14:53:50 +0200 Received: from ziv.haziz by proxy56.messagelabs.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 06 Aug 2012 14:53:50 +0200 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org i plan on adding an external dsp which has slimbus interface under soc-dsp framwork. currently i would like to make the following type of connection: CPU->DSP->Codec and as the dsp is an external one (physically seperated from both the CPU and the Codec) i have a difficulty defining how to represent it: do i need to make two entities of the dsp: - one for the BE connection and one for the FE connection and add some internal routing using mixer controls? this will create two devices in the user space which the user application should open? - or is there a way to make one device which is composed of all three blocks? last small question: as slimbus ports id should be passed how do you suggest a device should share his slimbus port id?