From: Carl Subject: ARM:OMAP3:DSS - LCD communication path Date: Thu, 21 Feb 2013 10:09:42 +0000 (UTC) Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from plane.gmane.org ([80.91.229.3]:51181 "EHLO plane.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752137Ab3BUKOq (ORCPT ); Thu, 21 Feb 2013 05:14:46 -0500 Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1U8TBB-0005Rc-61 for linux-omap@vger.kernel.org; Thu, 21 Feb 2013 11:15:05 +0100 Received: from 38.11.static.dcenter.pl ([38.11.static.dcenter.pl]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 21 Feb 2013 11:15:05 +0100 Received: from broszkigroszki by 38.11.static.dcenter.pl with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 21 Feb 2013 11:15:05 +0100 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Hi, My colleagues (hardware guys) have made some EMC tests and there is some increased emission when there is a static picture on the screen (different than some animation takes place). They asked me to check if there is a possibility to make such test which can help to determine the source of the problem (lcd display or path between DSS and display - data/clock lines). Omap DSS is quite new thing for me and I need an information if a simple injection of a picture to fb0 device can be some kind of case when traffic on data lines (DPI/RGB interface) is only after some data is put into fb0 or it is refreshed periodically. I suspect that if DSS hardware on Sitara AM3703 has some data in buffer it manages the vram contests on its own (refreshes LCD etc.). Regards, Carl