Return-Path: Received: from plane.gmane.org ([80.91.229.3]:54665 "EHLO plane.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754791Ab3DKRPT (ORCPT ); Thu, 11 Apr 2013 13:15:19 -0400 Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1UQL5h-0001vW-GF for linux-pci@vger.kernel.org; Thu, 11 Apr 2013 19:15:17 +0200 Received: from 183.12.184.59 ([183.12.184.59]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 11 Apr 2013 19:15:17 +0200 Received: from zhef2000 by 183.12.184.59 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 11 Apr 2013 19:15:17 +0200 To: linux-pci@vger.kernel.org From: zhengfei Subject: Re: [Question] Failed to access the BAR MMIO space of PCI device Date: Thu, 11 Apr 2013 17:15:06 +0000 (UTC) Message-ID: References: <1365431000.16420.11.camel@bling.home> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Sender: linux-pci-owner@vger.kernel.org List-ID: Alex Williamson redhat.com> writes: > > On Sun, 2013-04-07 at 19:19 +0000, zhengfei wrote: > > Hi, > > > > I'm writing a driver for a SR-IOV device on the PCI bus. My architecture is > > a 64-bit X86 of intel Sandy bridge. > > > > In my device driver, I want to configure the device to transfer data to/from > > X86.I get the the device BAR MMIO base address with the command "lspci - s > > 04:00.03 -xxx" in the guest os(kvm). > > But after I ioremap() that MMIO base address,I failed to access the BAR MMIO > > space in the guest os(kvm). > > > > Is there a function which show mapping between the real PCI address stored in > > the BAR and the emulated address stored in the BAR? > > Is this a userspace driver or a kernel driver? I can't figure out why > you would use lspci to get a static BAR address, then use ioremap() to > map it. If it's a kernel driver, the sequence you want is something > like: > > pci_enable_device > pci_request_selected_regions > pci_iomap > > Thanks, > Alex > > It is a userspace driver on guest os.To be simply,I got the BAR0 address(gpa) on guest os,but I failed to access real BAR0 MMIO address space of the device with the gpa.So what can I do next? and in which source code file,could I find the procedure of mapping the real BAR address space(hpa) to gpa? Thanks