From: Chuck Wical Date: Wed, 28 Aug 2013 18:58:49 +0000 (UTC) Subject: [U-Boot] USB fatload fails to load rootfs Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de I am trying to load rootfs.ext2.gz.uboot from usb using fatload but when it reaches a point in writing the file to memory a reset occurs of the CPU. If I load this file using tftp it works fine. Here are the commands I am using: loadaddr=0x21000000 tftp $(loadaddr) rootfs.ext2.gz.uboot usb start fatload usb 0 $(loadaddr) rootfs.ext2.gz.uboot The version of U-Boot used is 2009.11.1 and upgrading at this point may be an issue. Before a bunch of questions are asked I inherited this project, it is mature and works, I have no documentation, and I am simply trying to copy a file from usb to memory. Nothing more, nothing fancy. My searches on the web have not yielded any possible solutions or good explanations of the usb subsystem in U-Boot so I am hoping someone can provide some possible solutions or information I can read. Thanks! Chuck