Return-path: Received: from plane.gmane.org ([80.91.229.3]:34509 "EHLO plane.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754082Ab3KKQIo (ORCPT ); Mon, 11 Nov 2013 11:08:44 -0500 Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1Vfu2b-0002YA-Ob for linux-media@vger.kernel.org; Mon, 11 Nov 2013 17:08:41 +0100 Received: from w1622.pub.fh-zwickau.de ([141.32.250.174]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 11 Nov 2013 17:08:41 +0100 Received: from Bassai_Dai by w1622.pub.fh-zwickau.de with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 11 Nov 2013 17:08:41 +0100 To: linux-media@vger.kernel.org From: Tom Subject: ccdc image capture interrupts Date: Mon, 11 Nov 2013 16:08:17 +0000 (UTC) Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hello, I want to capture an image with my ov3640 camera sensor connected with a gumstix overo board. I tried to change the isp registers and the registers of the ov3640 like in an old driver which worked with kernel version 2.6.34. I was able to get an image but I don't understand what the problem might be. sudo ./media-ctl -v -r -l '"ov3640 3-003c":0->"OMAP3 ISP CCDC":0[1], "OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]' sudo ./media-ctl -v -V '"ov3640 3-003c":0 [UYVY2X8 640x480], "OMAP3 ISP CCDC":1 [UYVY2X8 640x480]' sudo ./yavta -p -f UYVY -s 640x480 -n 4 --skip 3 --capture=13 --file=img#.raw /dev/video2 the picture I got looks like this (should be a standard test pattern): http://s7.directupload.net/file/d/3435/2s5kuacl_png.htm does someone know on which signal each of these 3 functions (ccdc_vd0_isr; ccdc_vd1_isr; ccdc_hs_vs_isr) are called. what signal has to be high? Regards, Tom