From: AnandK Subject: =?utf-8?b?X0NQQw==?= info Date: Fri, 15 Nov 2013 23:03:42 +0000 (UTC) Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from plane.gmane.org ([80.91.229.3]:34614 "EHLO plane.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752476Ab3KOXUF (ORCPT ); Fri, 15 Nov 2013 18:20:05 -0500 Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1VhSgF-0003aI-6X for linux-acpi@vger.kernel.org; Sat, 16 Nov 2013 00:20:03 +0100 Received: from zcce02cs1743-db20.houston.hp.com ([15.203.233.77]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 16 Nov 2013 00:20:03 +0100 Received: from anand.kori by zcce02cs1743-db20.houston.hp.com with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 16 Nov 2013 00:20:03 +0100 Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org Hi All, I am try to write a driver for performance tuning. I am new to ACPI spec and going through this I need to get the performance values from the PCC subspace registers. I am trying to use acpi_read and by passing passing the info through Generic Address Register. By doing this I get an error saying Unknown Subspace Id. I do feel it is not the right way to get the register value and at the same point unable to understand how to do this. Could someone point me or give an idea how this should be made to work. Thanks, Anand